Specification sheet Wheel Loader Ref jcb-408zx-wheel-loader
JCB 408ZX
The JCB 408ZX is a wheel loader with an operating weight of 10,670.38 lb (4,840 kg), a 75 hp engine, and a 1.05 yd³ (0.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,670.38lb
4,840kg
Engine power
75hp
55.93kW
Gross Power Bucket capacity
1.05yd³
0.8m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the JCB 408ZX sits below the median for its class:
- Operating weight 10,670 lb lighter than 68% (n=374)
- Engine power 75 hp more powerful than 56% (n=367)
- Bucket capacity 1.1 yd³ smaller-bucket than 76% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2257 | |
| Engine Model | 1104C-44 | |
| Gross Power | 75hp | 56kw |
| Power Measured @ | 67rpm | |
| Max Torque | 222.8lb ft | 302Nm |
| Displacement | 268.6cu in | 4.4L |
| Torque Measured @ | 1400rpm | |
| Aspiration | naturally aspirated |
02 Operational Specification
| Operating Weight | 10670.4lb | 4840kg |
|---|---|---|
| Fuel Capacity | 26.5gal | 100L |
| Hydraulic System Fluid Capacity | 22.5gal | 85L |
| Engine Oil Fluid Capacity | 2.5gal | 9.4L |
| Cooling System Fluid Capacity | 4.1gal | 15.5L |
| Front Axle/Diff Fluid Capacity | 2.6gal | 9.5L |
| Rear Axle/Diff Fluid Capacity | 2.8gal | 10.5L |
| Static Tipping Weight | 7473.7lb | 3390kg |
| Turning Radius | 13.2ft in | 4010mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 75amps | |
| Rear Axle Oscillation | 18degrees |
03 Transmission Specification
| Transmission Type | hydrostatic | |
|---|---|---|
| Number Of Forward Gears | 2 | |
| Number Of Reverse Gears | 2 | |
| Max Speed - Forward | 12.5mph | 20km/h |
| Max Speed - Reverse | 12.5mph | 20km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 319psi | 2199.5kPa |
|---|---|---|
| Pump Flow Capacity | 17.5gal/min | 66L/min |
| Raise Time | 5sec | 4.95sec |
| Dump Time | 1sec | 0.95sec |
| Lower Time | 3.2sec | |
| Pump Type | gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.26ft in | 2517mm |
|---|---|---|
| Breakout Force | 9375lb | 41.71kN |
| Bucket Capacity - Heaped | 1.05yd3 | 0.8m3 |
| Bucket Capacity - Struck | 0.89yd3 | 0.68m3 |
| Bucket Width | 6.24ft in | 1900mm |
06 Dimensions Dimensions
| Ground Clearance | 1.35ft in | 410mm |
|---|---|---|
| Length With Bucket On Ground | 16.41ft in | 5000mm |
| Height To Top Of Cab | 8.57ft in | 2610mm |
| Wheelbase | 6.57ft in | 2000mm |
| Hinge Pin - Max Height | 10.31ft in | 3142mm |
| Reach At Max Lift And Dump | 2.01ft in | 612mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.