Specification sheet Skid Steer Loader Ref jcb-3ts-8w-skid-steer-loader
JCB 3TS-8W
The JCB 3TS-8W is a skid steer loader with a 74 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Engine power
74hp
55.2kW
Gross Power ◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the JCB 3TS-8W sits above the median for its class:
- Engine power 74 hp more powerful than 69% (n=335)
Not positioned on operating weight, rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | EPA-T4F (EU St3B) | |
|---|---|---|
| Fuel | Diesel | |
| Engine Oil Service Interval Hours | 500 | |
| Starter Motor | 4.2 Kw | |
| Battery | 12 V | |
| Engine Model | EcoMAX TCAE-55 | |
| Gross Power | 74hp | 55.2kw |
| Cooling System | Water | |
| Power Measured @ | 2400rpm | |
| Max Torque | 295.1lb ft | 400Nm |
| Torque Measured @ | 1200rpm | |
| Aspiration | Turbo | |
| Displacement | 268.5cu in | 4.4L |
| Alternator | 95amps |
02 Operational Specification
| Fuel Capacity | 27.3gal | 103L |
|---|---|---|
| Cooling System Fluid Capacity | 5.9gal | 22L |
| Engine Oil Fluid Capacity | 3.7gal | 14L |
| Hydraulic System Fluid Capacity | 14.6gal | 55L |
03 Weights Specification
| Cab | 9859.1lb | 4472kg |
|---|---|---|
| Operating Weight - Rops Canopy | 9726.8lb | 4412kg |
04 Hydraulic Specification
| R.O.C Extended | 1347.1lb | 611kg |
|---|---|---|
| Loader Lift Extended | 3461.3lb | 1570kg |
| Shovel Tilt Extended | 6543.4lb | 2968kg |
| Pump Flow Capacity | 23.8gal/min | 90L/min |
05 Dimensions Dimensions
| Width Over Tires | 5.91ft in | 1800mm |
|---|---|---|
| Ground Clearance | 9.38in | 238mm |
| Height To Top Of Cab | 6.89ft in | 2100mm |
| Wheelbase | 4.11ft in | 1250mm |
| Max. Rollback Angle | 94degrees | |
| Rollback @ Ground | 30degrees | |
| Standard Shovel Width | 72.84in | 1850mm |
| Length Without Attachment | 9.91ft in | 3.02m |
| Dump Angle | 42degrees | |
| Angle Of Departure | 29degrees |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.