Specification sheet Compact Track Loader Ref jcb-325t-multi-terrain-loader

JCB 325T

The JCB 325T is a compact track loader with an operating weight of 12,363.53 lb (5,608 kg), a 73.8 hp engine, and a 0.6 yd³ (0.5 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
12,363.53lb
5,608kg
Engine power
73.8hp
55kW
Gross Power
Bucket capacity
0.6yd³
0.5m³

Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the JCB 325T sits at the heavy end of its class:

  • Operating weight 12,360 lb heavier than 96% (n=182)
  • Engine power 74 hp more powerful than 51% (n=167)

Not positioned on rated operating capacity — withheld or unpublished for this machine.

Scale drawingdrawn to scale · mm

2080B230C3800A
Side elevation
2080B1900D
Front elevation

01 Engine Specification

Emissions Certification EPA-T4F (EU St3B)
Fuel Diesel
Engine Oil Service Interval Hours 500
Starter Motor 4.2 KW
Battery 12 V
Engine Model EcoMAX TCAE-55
Gross Power 73.8hp 55kw
Cooling System Liquid
Power Measured @ 2400rpm
Peak Torque 295.1lb ft 400Nm
Torque Measured @ 1200rpm
Displacement 268.5cu in 4.4L
Alternator 95amps
Aspiration Liquid

02 Operational Specification

Operating Weight 12363.6lb 5608kg
Cooling System Fluid Capacity 5.9gal 22L
Engine Oil Capacity 4gal 15L
Fuel Capacity 27.3gal 103.3L
Hydraulic System Fluid Capacity 14.6gal 55L

03 Transmission Specification

Travelling Speed 7.7 / 12.5
Model Two Speed

04 Loader Specification

Breakout Force 6543.4lb 2968kg
Bucket Capacity 0.6yd3 0.5m3
Bucket Width 74.9in 1900mm

05 Dimensions Dimensions

Width Over Tracks 6.24ft in 1900mm
Height To Top Of Cab 6.83ft in 2080mm
Ground Clearance 9.06in 230mm
Dump Height - Maximum 89.77in 2280mm
Length With Bucket 12.47ft in 3800mm
Angle Of Departure 29degrees
Max. Reach @ Full Height 4.27ft in 1.3m
Pin Height 10.44ft in 3.18m
Reach @ Ground Level 3.61ft in 1.11m
Rollback @ Ground 30degrees
Wheelbase 6.89ft in 2100mm
Loadover Height 9.45ft in 2.88m
Dump Angle 42degrees

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.