Specification sheet Compact Track Loader Ref jcb-260t-multi-terrain-loader
JCB 260T
The JCB 260T is a compact track loader with an operating weight of 10,205 lb (4,628.92 kg), and a 84 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,205lb
4,628.92kg
Engine power
84hp
62.7kW
Gross Power ◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the JCB 260T sits above the median for its class:
- Operating weight 10,210 lb heavier than 73% (n=182)
- Engine power 84 hp more powerful than 78% (n=167)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2257 | |
|---|---|---|
| Engine Model | Dieselmax TC-63 | |
| Gross Power | 84hp | 62.7kw |
| Power Measured @ | 2400rpm | |
| Peak Torque | 267lb ft | 362.1Nm |
| Torque Measured @ | 1800rpm | |
| Displacement | 268cu in | 4.4L |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 10205lb | 4629kg |
|---|---|---|
| Cooling System Fluid Capacity | 4.1gal | 15.5L |
| Engine Oil Capacity | 3.7gal | 14L |
| Fuel Capacity | 27.3gal | 103L |
| Hydraulic System Fluid Capacity | 15.9gal | 60L |
| Operating Voltage | 12V | |
| Max Speed - Low Range | 5.7mph | 9.2km/h |
03 Hydraulic Specification
| Pump Flow | 23gal/min | 87.1L/min |
|---|---|---|
| Relief Valve Pressure | 3335psi | 22994kPa |
04 Dimensions Dimensions
| Width Over Tracks | 6.5ft in | 1980mm |
|---|---|---|
| Height To Top Of Cab | 6.83ft in | 2080mm |
| Ground Clearance | 9.77in | 248mm |
| Clearance At Max Lift And Dump | 7.94ft in | 2420mm |
| Reach At Max Lift And Dump | 2.86ft in | 870mm |
| Length With Bucket | 12.11ft in | 3690mm |
05 Undercarriage Dimensions
| Width Of Track | 17.7in | 449.58mm |
|---|---|---|
| Ground Pressure | 4.6psi | 31.72kPa |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.