Specification sheet Compact Track Loader Ref jcb-250t-multi-terrain-loader
JCB 250T
The JCB 250T is a compact track loader with an operating weight of 10,621.88 lb (4,818 kg), a 73.8 hp engine, and a 0.6 yd³ (0.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,621.88lb
4,818kg
Engine power
73.8hp
55kW
Gross Power Bucket capacity
0.6yd³
0.5m³
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the JCB 250T sits above the median for its class:
- Operating weight 10,620 lb heavier than 80% (n=182)
- Engine power 74 hp more powerful than 51% (n=167)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | EPA-T4F (EU St3B) | |
|---|---|---|
| Fuel | Diesel | |
| Engine Oil Service Interval Hours | 500 | |
| Starter Motor | 4.2 KW | |
| Battery | 12 V | |
| Engine Model | EcoMAX TCAE-55 | |
| Gross Power | 73.8hp | 55kw |
| Cooling System | Liquid | |
| Power Measured @ | 2400rpm | |
| Peak Torque | 295.1lb ft | 400Nm |
| Torque Measured @ | 1200rpm | |
| Displacement | 268.5cu in | 4.4L |
| Alternator | 95amps | |
| Aspiration | Liquid |
02 Operational Specification
| Operating Weight | 10621.9lb | 4818kg |
|---|---|---|
| Cooling System Fluid Capacity | 5.9gal | 22L |
| Engine Oil Capacity | 4gal | 15L |
| Fuel Capacity | 27.3gal | 103.3L |
| Hydraulic System Fluid Capacity | 14.6gal | 55L |
03 Transmission Specification
| Travelling Speed | 7.7 / 12.5 | |
|---|---|---|
| Model | Two Speed |
04 Loader Specification
| Breakout Force | 6543.4lb | 2968kg |
|---|---|---|
| Bucket Capacity | 0.6yd3 | 0.5m3 |
| Bucket Width | 74.9in | 1900mm |
05 Dimensions Dimensions
| Width Over Tracks | 6.24ft in | 1900mm |
|---|---|---|
| Height To Top Of Cab | 6.83ft in | 2080mm |
| Ground Clearance | 9.06in | 230mm |
| Dump Height - Maximum | 89.77in | 2280mm |
| Length With Bucket | 12.47ft in | 3800mm |
| Angle Of Departure | 29degrees | |
| Max. Reach @ Full Height | 3.29ft in | 1m |
| Pin Height | 10.44ft in | 3.18m |
| Reach @ Ground Level | 3.61ft in | 1.11m |
| Rollback @ Ground | 30degrees | |
| Wheelbase | 6.89ft in | 2100mm |
| Loadover Height | 9.45ft in | 2.88m |
| Dump Angle | 42degrees |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.