Specification sheet Skid Steer Loader Ref jcb-210-skid-steer-loader
JCB 210
The JCB 210 is a skid steer loader with an operating weight of 6,885.04 lb (3,123 kg), a 73.8 hp engine, and a 0.5 yd³ (0.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
6,885.04lb
3,123kg
Engine power
73.8hp
55kW
Gross Power Bucket capacity
0.5yd³
0.4m³
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the JCB 210 sits in the middle of its class:
- Operating weight 6,890 lb heavier than 52% (n=334)
- Engine power 74 hp more powerful than 67% (n=335)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Tyres Specification
| Standard | 10 x 16.5 - 8 PR Xtra Wall Off Road |
|---|
02 Engine Specification
| Emissions Certification | EPA-T4F (EU St3B) | |
|---|---|---|
| Fuel | Diesel | |
| Starter Motor | 2 KW | |
| Battery | 12 V | |
| Hydraulically Driven Cooling Fan | Yes | |
| Engine Oil Service Interval | 500 hours | |
| Engine Model | Kohler - KDI2504TCR/26A | |
| Gross Power | 73.8hp | 55kw |
| Cooling System | Diesel | |
| Power Measured @ | 2400rpm | |
| Max Torque | 221.3lb ft | 300Nm |
| Torque Measured @ | 1200rpm | |
| Aspiration | Turbo | |
| Displacement | 2482cu in | 40.7L |
| Alternator | 100amps |
03 Capacities Specification
| Fuel Tank | 24.4gal | 92L |
|---|---|---|
| Hydraulic System | 11.5gal | 43.5L |
| Engine Oil | 2gal | 7.4L |
| Engine Coolant | 2.7gal | 10L |
04 Operational Specification
| Sae Cab Operating Weight 1 | 6979.9lb | 3166kg |
|---|---|---|
| Sae Cab Operating Weight 2 | 7074.7lb | 3209kg |
| Roc With Full Counterweight | 2237.7lb | 1015kg |
| Operational Weight | 6885.1lb | 3123kg |
05 Transmission Specification
| Model | Single Speed | |
|---|---|---|
| Travel Speed | 7.5mph | 12km/h |
06 Loader Specification
| Tipping Load - Full Counterweight | 4475.4lb | 2030kg |
|---|---|---|
| Loader Lift Capacity With Bucket | 4131.5lb | 1874kg |
| Tipping Load - No Counterweight | 4228.5lb | 1918kg |
| Breakout Force | 3964lb | 1798kg |
| Bucket Capacity | 0.5yd3 | 0.4m3 |
| Bucket Width | 66.2in | 1680mm |
07 Hydraulic Specification
| Pump Flow Capacity | 18.5gal/min | 70L/min |
|---|---|---|
| Relief Valve Pressure | 483.8psi | 3335kPa |
08 Dimensions Dimensions
| Ground Clearance | 8.27in | 210mm |
|---|---|---|
| Wheelbase | 3.52ft in | 1070mm |
| Dump Angle | 42degrees | |
| Dump Height | 7.42ft in | 2260mm |
| Loadover Height | 9317.59ft in | 2840m |
| Max. Reach @ Full Height | 3.97ft in | 1.21m |
| Overall Height | 6.5ft in | 1980mm |
| Overall Length | 137.41in | 3490mm |
| Pin Height | 9.85ft in | 3m |
| Quick Hitch Turning Radius | 3.75ft in | 1.14m |
| Reach @ Ground Level | 3.55ft in | 1.08m |
| Rear Chassis Turning Radius | 5.42ft in | 1.65m |
| Rollback - Ground Level | 30degrees | |
| Angle Of Departure | 25degrees | |
| Width Over Tyres | 59.85in | 1520mm |
| Bucket Corner Turning Radius | 6.86ft in | 2.09m |
?Questions & answersfrom this machine's data
- How much does a JCB 210 skid steer weigh?
- A JCB 210 skid steer has an operating weight of 6,885 lb (3,123 kg).
- What engine does a JCB 210 skid steer have?
- A JCB 210 skid steer is powered by a Kohler - KDI2504TCR/26A engine producing 73.8 hp (55 kW).
- What is the ground clearance of a JCB 210 skid steer?
- A JCB 210 skid steer has a ground clearance of 8.3 in (210 mm).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.