Specification sheet Mini Excavator Ref jcb-19c-1-mini-excavator
JCB 19c-1
The JCB 19c-1 is a mini excavator with an operating weight of 3,855.9 lb, a 14.5 hp engine, and a dig depth of 7.95 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld → Operating weight
3,855.9lb
Engine power Net Power
14.5hp
Dig depth
7.95ft
◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the JCB 19c-1 sits below the median for its class:
- Operating weight 3,860 lb lighter than 76% (n=438)
- Engine power 15 hp less powerful than 92% (n=448)
- Dig depth 8 ft shallower-digging than 69% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
02 Dimensions Specification
| Ground Clearance | 0.54ft in | 165mm‖ — metric converted from the published imperial value |
|---|---|---|
| Tail Swing Radius | 3.62ft in | 1,103mm‖ — metric converted from the published imperial value |
| Track Gauge | 2.47ft in | 753mm‖ — metric converted from the published imperial value |
| Width Over Tracks | 3.22ft in | 981mm‖ — metric converted from the published imperial value |
| Cab Width | 38.43in | 976.1mm‖ — metric converted from the published imperial value |
| Height Over Cab | 7.64ft in | 2,329mm‖ — metric converted from the published imperial value |
| Overall Width Of Superstructure | 3.27ft in | 997mm‖ — metric converted from the published imperial value |
| Undercarriage Overall Length | 5.18ft in | 1,579mm‖ — metric converted from the published imperial value |
| Cab Length | 317.54gal | 1,202l‖ — metric converted from the published imperial value |
| Transport Length | 139.65in | 3,547.1mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Number Of Bottom Rollers Per Side | 3 | |
|---|---|---|
| Tractive Effort | 29.11lb | 13.2kg‖ — metric converted from the published imperial value |
04 Engine Specification
| Fuel | Diesel | |
|---|---|---|
| Starter Motor | 1.2KW | |
| Engine Model | 403D-07 | |
| Gross Power | 15.7hp | 11.7kw‖ — metric converted from the published imperial value |
| Cooling System | Water cooled | |
| Net Power | 14.5hp | 10.8kw‖ — metric converted from the published imperial value |
| Displacement | 22cu in | 361cm3‖ — metric converted from the published imperial value |
| Max Torque | 33.7lb ft | |
| Alternator | 60amps |
05 Capacities Specification
| Fuel Tank | 5.5gal | 21l‖ — metric converted from the published imperial value |
|---|---|---|
| Hydraulic Tank | 4gal | 15l‖ — metric converted from the published imperial value |
| Hydraulic System | 7.4gal | 28l‖ — metric converted from the published imperial value |
| Engine Oil | 0.7gal | 3l‖ — metric converted from the published imperial value |
| Engine Coolant | 1.2gal | 4.5l‖ — metric converted from the published imperial value |
06 Operational Specification
| Operating Weight | 3855.9lb | 1,749kg‖ — metric converted from the published imperial value |
|---|---|---|
| Operational Voltage | 12V |
07 Performance Specification
| Travel Speed Low | 1.3mph | 2.1km/h‖ — metric converted from the published imperial value |
|---|---|---|
| Gradeability | 35% |
08 Weights Specification
| Steel Tracks | 178.6lb | 81.01kg‖ — metric converted from the published imperial value |
|---|---|---|
| Long Dozer | 19.9lb | 9.03kg‖ — metric converted from the published imperial value |
| Mechanical Quickhitch | 21700.1in2 | |
| Ground Bearing Pressure (Rubber Tracks) | 0.8psi | 6kpa‖ — metric converted from the published imperial value |
| Ground Bearing Pressure (Steel Tracks) | 0.8psi | 6kpa‖ — metric converted from the published imperial value |
| Shipping | 3218.8lb | 1,460kg‖ — metric converted from the published imperial value |
09 Blade Specification
| Approach Angle | 25.3degrees |
|---|
10 Hydraulic System Specification
| Excavator/Track Main Relief | 235bar | |
|---|---|---|
| Slew Main Relief | 167bar |
11 Blade Specification
| Maximum Height | 0.8ft in | 244mm‖ — metric converted from the published imperial value |
|---|
12 Hydraulic System Specification
| Nominal Output | 9.6gal/min | 36l/min‖ — metric converted from the published imperial value |
|---|
13 Blade Specification
| Dig Depth (Below Ground) | 0.8ft in | 244mm‖ — metric converted from the published imperial value |
|---|
14 Hydraulic System Specification
| Auxiliary Hydraulic Flow | 8.5gal/min | 32l/min‖ — metric converted from the published imperial value |
|---|
15 Blade Specification
| Blade Height | 9.3in | 236mm‖ — metric converted from the published imperial value |
|---|---|---|
| Width | 3.3ft in | 1,006mm‖ — metric converted from the published imperial value |
16 Boom Specification
| Boom Swing Left | 75degrees | |
|---|---|---|
| Boom Swing Right | 55degrees | |
| Bucket Rotation | 201degrees | |
| Dipper Rotation | 126degrees | |
| Bucket Tearout | 3507.1lb | 1,590.8kg‖ — metric converted from the published imperial value |
| Dipper Tearout | 1978.4lb | 897.39kg‖ — metric converted from the published imperial value |
| Slew Speed | 7.9rpm |
?Questions & answersfrom this machine's data
- How much does a JCB 19c-1 mini excavator weigh?
- A JCB 19c-1 mini excavator has an operating weight of 3,855.9 lb (1,749 kg). The metric figure is converted from the published imperial value.
- What engine does a JCB 19c-1 mini excavator have?
- A JCB 19c-1 mini excavator is powered by a 403D-07 engine producing 14.5 hp (10.8 kW). The metric figure is converted from the published imperial value.
- How deep can a JCB 19c-1 mini excavator dig?
- A JCB 19c-1 mini excavator has a maximum dig depth of 8 ft (2,423 mm). The metric figure is converted from the published imperial value.
- What is the tail swing radius of a JCB 19c-1 mini excavator?
- A JCB 19c-1 mini excavator has a tail swing radius of 3.6 ft (1,103 mm). The metric figure is converted from the published imperial value.
Data notes
‖
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.