Specification sheet Compact Track Loader Ref jcb-190t-multi-terrain-loader
JCB 190T
The JCB 190T is a compact track loader with an operating weight of 9,700.34 lb (4,400 kg), a 70 hp engine, a rated operating capacity of 1,984.17 lb (900 kg), and a 0.7 yd³ (0.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,700.34lb
4,400kg
Engine power
70hp
52.2kW
Net Power Rated operating capacity
1,984.17lb
900kg
Bucket capacity
0.7yd³
0.5m³
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the JCB 190T sits in the middle of its class:
- Operating weight 9,700 lb heavier than 58% (n=182)
- Engine power 70 hp less powerful than 63% (n=167)
- Rated operating capacity 1,980 lb lower-rated than 76% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2257 | |
| Gross Power | 80hp | 59.7kw |
| Net Power | 70hp | 52.2kw |
| Power Measured @ | 2200rpm | |
| Peak Torque | 212lb ft | 287.5Nm |
| Torque Measured @ | 1200rpm | |
| Displacement | 244.1cu in | 4L |
| Aspiration | naturally aspirated |
02 Operational Specification
| Operating Weight | 9700.4lb | 4400kg |
|---|---|---|
| Cooling System Fluid Capacity | 4gal | 15L |
| Engine Oil Capacity | 2.9gal | 10.8L |
| Fuel Capacity | 28.3gal | 107L |
| Hydraulic System Fluid Capacity | 9.3gal | 35L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 72amps | |
| Max Speed - High Range | 6.3mph | 10.1km/h |
03 Loader Specification
| Operating Load | 1984.2lb | 900kg |
|---|---|---|
| Bucket Capacity | 0.7yd3 | 0.5m3 |
04 Hydraulic Specification
| Pump Type | hydrostatic drive pumps | |
|---|---|---|
| Pump Flow | 20.1gal/min | 76L/min |
| Relief Valve Pressure | 2682psi | 18491.8kPa |
05 Dimensions Dimensions
| Width Over Tracks | 6.01ft in | 1829mm |
|---|---|---|
| Height To Top Of Cab | 6.66ft in | 2029mm |
| Ground Clearance | 10.99in | 279mm |
| Clearance At Max Lift And Dump | 8.01ft in | 2439mm |
| Reach At Max Lift And Dump | 2.15ft in | 655mm |
| Turning Radius From Center - Machine Rear | 65.52in | 1664mm |
| Length With Bucket | 11.49ft in | 3500mm |
| Length With Out Bucket | 7.79ft in | 2373mm |
| Turning Radius From Center - Inc Bucket | 86.58in | 2199mm |
06 Undercarriage Dimensions
| Length Of Track On Ground | 4.99ft in | 1519mm |
|---|---|---|
| Width Of Track | 12.6in | 320mm |
| Ground Pressure | 4.8psi | 33.1kPa |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.