Specification sheet Compact Track Loader Ref jcb-180t-multi-terrain-loader
JCB 180T
The JCB 180T is a compact track loader with an operating weight of 8,002.78 lb (3,630 kg), a 60 hp engine, a rated operating capacity of 1,807.8 lb (820 kg), and a 0.6 yd³ (0.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,002.78lb
3,630kg
Engine power
60hp
44.8kW
Gross Power Rated operating capacity
1,807.8lb
820kg
Bucket capacity
0.6yd³
0.5m³
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the JCB 180T sits below the median for its class:
- Operating weight 8,000 lb lighter than 70% (n=182)
- Engine power 60 hp less powerful than 80% (n=167)
- Rated operating capacity 1,810 lb lower-rated than 85% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 0 | |
| Engine Model | 404C-22T | |
| Gross Power | 60hp | 44.8kw |
| Power Measured @ | 2800rpm | |
| Peak Torque | 140lb ft | 189.9Nm |
| Torque Measured @ | 1800rpm | |
| Displacement | 134cu in | 2.2L |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 8002.8lb | 3630kg |
|---|---|---|
| Cooling System Fluid Capacity | 2.7gal | 10L |
| Fuel Capacity | 21.2gal | 80L |
| Engine Oil Capacity | 2.6gal | 9.6L |
| Hydraulic System Fluid Capacity | 8gal | 30L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 55amps | |
| Max Speed - High Range | 6.9mph | 11km/h |
03 Loader Specification
| Breakout Force | 5672.5lb | 2573kg |
|---|---|---|
| Operating Load | 1807.8lb | 820kg |
| Bucket Capacity | 0.6yd3 | 0.5m3 |
04 Hydraulic Specification
| Pump Type | hydrostatic drive pumps | |
|---|---|---|
| Pump Flow | 15.9gal/min | 60L/min |
| Relief Valve Pressure | 3000psi | 20684.3kPa |
05 Dimensions Dimensions
| Width Over Tracks | 5.5ft in | 1676mm |
|---|---|---|
| Height To Top Of Cab | 6.35ft in | 1933mm |
| Ground Clearance | 9.06in | 230mm |
| Clearance At Max Lift And Dump | 7.34ft in | 2237mm |
| Reach At Max Lift And Dump | 1.77ft in | 537mm |
| Turning Radius From Center - Machine Rear | 61.82in | 1570mm |
| Length With Bucket | 10.98ft in | 3345mm |
| Turning Radius From Center - Inc Bucket | 81.15in | 2061mm |
06 Undercarriage Dimensions
| Length Of Track On Ground | 4.63ft in | 1409mm |
|---|---|---|
| Track Gauge | 4.45ft in | 1356mm |
| Ground Contact Area | 1395.01in2 | 0.9m2 |
| Width Of Track | 12.6in | 320mm |
| Ground Pressure | 5.06psi | 34.89kPa |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.