Specification sheet Skid Steer Loader Ref jcb-155-skid-steer-loader
JCB 155
The JCB 155 is a skid steer loader with an operating weight of 6,514.66 lb (2,955 kg), a 56 hp engine, and a 0.5 yd³ (0.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
6,514.66lb
2,955kg
Engine power
56hp
41.8kW
Gross Power Bucket capacity
0.5yd³
0.4m³
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the JCB 155 sits in the middle of its class:
- Operating weight 6,510 lb lighter than 56% (n=334)
- Engine power 56 hp less powerful than 66% (n=335)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Tyres Specification
| Standard | 10 x 16.5 - 8 PR Xtra Wall Off Road |
|---|
02 Engine Specification
| Emissions Certification | EPA-T4F (EU St3B) | |
|---|---|---|
| Fuel | Diesel | |
| Starter Motor | 2 kW | |
| Battery | 12 V | |
| Hydraulically Driven Cooling Fan | Yes | |
| Engine Oil Service Interval | 500 hours | |
| Engine Model | Kohler KDI 1903TCR/26B | |
| Gross Power | 56hp | 41.8kw |
| Cooling System | Diesel | |
| Power Measured @ | 2400rpm | |
| Max Torque | 166lb ft | 225Nm |
| Torque Measured @ | 1200rpm | |
| Aspiration | Turbo | |
| Displacement | 1860cu in | 30.5L |
| Alternator | 100amps |
03 Capacities Specification
| Fuel Tank | 24.4gal | 92L |
|---|---|---|
| Hydraulic System | 11.5gal | 43.5L |
| Engine Oil | 2gal | 7.4L |
| Engine Coolant | 2.7gal | 10L |
04 Operational Specification
| Operational Weight | 6514.7lb | 2955kg |
|---|
05 Transmission Specification
| Model | Single Speed | |
|---|---|---|
| Travel Speed | 7.5mph | 12km/h |
06 Loader Specification
| Loader Lift Capacity With Bucket | 3902.2lb | 1770kg |
|---|---|---|
| Tipping Load - No Counterweight | 3099.7lb | 1406kg |
| Breakout Force | 4012.5lb | 1820kg |
| Bucket Capacity | 0.5yd3 | 0.4m3 |
| Bucket Width | 66.2in | 1680mm |
07 Hydraulic Specification
| Pump Flow Capacity | 18.5gal/min | 70L/min |
|---|---|---|
| Relief Valve Pressure | 3335psi | 22994kPa |
08 Dimensions Dimensions
| Ground Clearance | 8.27in | 210mm |
|---|---|---|
| Wheelbase | 3.52ft in | 1070mm |
| Dump Angle | 42degrees | |
| Dump Height | 7.42ft in | 2260mm |
| Loadover Height | 9317.59ft in | 2840m |
| Max. Reach @ Full Height | 3.25ft in | 0.99m |
| Overall Height | 6.5ft in | 1980mm |
| Overall Length | 137.41in | 3490mm |
| Pin Height | 9.91ft in | 3.02m |
| Quick Hitch Turning Radius | 3.75ft in | 1.14m |
| Reach @ Ground Level | 3.55ft in | 1.08m |
| Rear Chassis Turning Radius | 5.42ft in | 1.65m |
| Rollback - Ground Level | 30degrees | |
| Angle Of Departure | 27degrees | |
| Width Over Tyres | 59.85in | 1520mm |
| Bucket Corner Turning Radius | 6.86ft in | 2.09m |
?Questions & answersfrom this machine's data
- How much does a JCB 155 skid steer weigh?
- A JCB 155 skid steer has an operating weight of 6,514.7 lb (2,955 kg).
- What engine does a JCB 155 skid steer have?
- A JCB 155 skid steer is powered by a Kohler KDI 1903TCR/26B engine producing 56 hp (41.8 kW).
- What is the ground clearance of a JCB 155 skid steer?
- A JCB 155 skid steer has a ground clearance of 8.3 in (210 mm).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.