Specification sheet Compact Track Loader Ref jcb-150t-multi-terrain-loader
JCB 150T
The JCB 150T is a compact track loader with an operating weight of 8,137.27 lb (3,691 kg), a 56 hp engine, and a 0.5 yd³ (0.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,137.27lb
3,691kg
Engine power
56hp
41.8kW
Gross Power Bucket capacity
0.5yd³
0.4m³
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the JCB 150T sits below the median for its class:
- Operating weight 8,140 lb lighter than 67% (n=182)
- Engine power 56 hp less powerful than 87% (n=167)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | EPA-T4F (EU St3B) | |
|---|---|---|
| Fuel | Diesel | |
| Engine Oil Service Interval Hours | 500 | |
| Starter Motor | 2 KW | |
| Battery | 12 V | |
| Engine Model | Kohler KDI 1903TCR/26B | |
| Gross Power | 56hp | 41.8kw |
| Cooling System | Liquid | |
| Power Measured @ | 2400rpm | |
| Peak Torque | 166lb ft | 225Nm |
| Torque Measured @ | 1200rpm | |
| Displacement | 113.5cu in | 1.9L |
| Alternator | 100amps | |
| Aspiration | Turbo |
02 Operational Specification
| Operating Weight | 8137.3lb | 3691kg |
|---|---|---|
| Cooling System Fluid Capacity | 2.7gal | 10L |
| Engine Oil Capacity | 2gal | 7.4L |
| Fuel Capacity | 25.9gal | 98L |
| Hydraulic System Fluid Capacity | 11.5gal | 43.5L |
03 Transmission Specification
| Model | Single Speed | |
|---|---|---|
| Travel Speed | 6.3mph | 10km/h |
04 Loader Specification
| Breakout Force | 4012.5lb | 1820kg |
|---|---|---|
| Bucket Capacity | 0.5yd3 | 0.4m3 |
| Bucket Width | 66.2in | 1680mm |
05 Dimensions Dimensions
| Width Over Tracks | 5.52ft in | 1680mm |
|---|---|---|
| Height To Top Of Cab | 6.57ft in | 2000mm |
| Ground Clearance | 9.06in | 230mm |
| Clearance At Max Lift And Dump | 9.91ft in | 3020mm |
| Reach At Max Lift And Dump | 3.25ft in | 990mm |
| Wheelbase | 1780 mm | |
| Length With Bucket | 11.46ft in | 3490mm |
| Angle Of Departure | 27degrees | |
| Dump Height | 7.52ft in | 2290mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.