Specification sheet Compact Track Loader Ref jcb-1110t-multi-terrain-loader
JCB 1110T
The JCB 1110T is a compact track loader with an operating weight of 10,196.38 lb (4,625 kg), a 82 hp engine, a rated operating capacity of 2,248.72 lb (1,020 kg), and a 0.8 yd³ (0.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,196.38lb
4,625kg
Engine power
82hp
61.15kW
Net Power Rated operating capacity
2,248.72lb
1,020kg
Bucket capacity
0.8yd³
0.6m³
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the JCB 1110T sits above the median for its class:
- Operating weight 10,200 lb heavier than 71% (n=182)
- Engine power 82 hp more powerful than 68% (n=167)
- Rated operating capacity 2,250 lb lower-rated than 64% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2257 | |
| Gross Power | 92hp | 68.7kw |
| Net Power | 82hp | 61.2kw |
| Power Measured @ | 2200rpm | |
| Peak Torque | 272lb ft | 368.8Nm |
| Torque Measured @ | 1200rpm | |
| Displacement | 238cu in | 3.9L |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 10196.4lb | 4625kg |
|---|---|---|
| Cooling System Fluid Capacity | 4gal | 15L |
| Engine Oil Capacity | 2.9gal | 10.8L |
| Fuel Capacity | 28.3gal | 107L |
| Hydraulic System Fluid Capacity | 9.3gal | 35L |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 72amps | |
| Max Speed - High Range | 6.3mph | 10.1km/h |
03 Loader Specification
| Operating Load | 2248.8lb | 1020kg |
|---|---|---|
| Bucket Capacity | 0.8yd3 | 0.6m3 |
04 Hydraulic Specification
| Pump Type | hydrostatic drive pumps | |
|---|---|---|
| Pump Flow | 20.1gal/min | 76L/min |
| Relief Valve Pressure | 2682psi | 18491.8kPa |
05 Dimensions Dimensions
| Width Over Tracks | 6.5ft in | 1981mm |
|---|---|---|
| Height To Top Of Cab | 6.66ft in | 2029mm |
| Ground Clearance | 10.99in | 279mm |
| Clearance At Max Lift And Dump | 8.01ft in | 2439mm |
| Reach At Max Lift And Dump | 2.15ft in | 655mm |
| Turning Radius From Center - Machine Rear | 65.52in | 1664mm |
| Length With Bucket | 11.49ft in | 3500mm |
| Length With Out Bucket | 7.79ft in | 2373mm |
| Turning Radius From Center - Inc Bucket | 86.58in | 2199mm |
06 Undercarriage Dimensions
| Length Of Track On Ground | 4.99ft in | 1519mm |
|---|---|---|
| Width Of Track | 12.6in | 320mm |
| Ground Pressure | 4.8psi | 33.1kPa |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.