Specification sheet Compact Track Loader Ref ihi-cl35-multi-terrain-loader
IHI CL35
The IHI CL35 is a compact track loader with an operating weight of 7,826.41 lb (3,550 kg), a 65.8 hp engine, a rated operating capacity of 2,458.16 lb (1,115 kg), and a 0.5 yd³ (0.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,826.41lb
3,550kg
Engine power
65.8hp
49kW
Gross Power Rated operating capacity
2,458.16lb
1,115kg
Bucket capacity
0.5yd³
0.4m³
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the IHI CL35 sits below the median for its class:
- Operating weight 7,830 lb lighter than 74% (n=182)
- Engine power 66 hp less powerful than 73% (n=167)
- Rated operating capacity 2,460 lb lower-rated than 57% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | Yanmar | |
|---|---|---|
| Engine Model | 4TNV98 | |
| Gross Power | 65.8hp | 49kw |
| Power Measured @ | 2400rpm | |
| Displacement | 202.5cu in | 3.4L |
02 Operational Specification
| Bucket Width | 5.7ft in | 1730mm |
|---|---|---|
| Operating Weight | 7826.5lb | 3550kg |
| Fuel Capacity | 24.1gal | 91L |
| Max Speed - Low Range | 4.2mph | 6.7km/h |
| Max Speed - High Range | 6.3mph | 10km/h |
| Hydraulic Tank | 10.6gal | 40L |
03 Loader Specification
| Tip Capacity | 4916.4lb | 2230kg |
|---|---|---|
| Operating Load | 2458.2lb | 1115kg |
| Bucket Capacity | 0.5yd3 | 0.4m3 |
04 Hydraulic Specification
| Auxiliary Hydraulic Flow | 17.7gal/min | 66.7L/min |
|---|---|---|
| Relief Valve Pressure | 2987.8psi | 20600kPa |
05 Dimensions Dimensions
| Width Over Tracks | 5.48ft in | 1670mm |
|---|---|---|
| Height To Top Of Cab | 7.01ft in | 2135mm |
| Ground Clearance | 12.21in | 310mm |
| Clearance At Max Lift And Dump | 12.72ft in | 3875mm |
| Reach At Max Lift And Dump | 2.5ft in | 760mm |
| Gradeability | 58% |
06 Undercarriage Dimensions
| Length Of Track On Ground | 4.6ft in | 1400mm |
|---|---|---|
| Ground Pressure | 5.65psi | 38.9kPa |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.