Specification sheet Skid Steer Loader Ref hyundai-hsl810-skid-steer-loader

Hyundai HSL810

The Hyundai HSL810 is a skid steer loader with an operating weight of 7,187.08 lb (3,260 kg), a 68.5 hp engine, and a 0.5 yd³ (0.4 m³) bucket.

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
7,187.08lb
3,260kg
Engine power
68.5hp
51.09kW
Net Power
Bucket capacity
0.5yd³
0.4m³

◆Where it sits in its classpercentile · skid steer loaders

Among 360 skid steer loaders , the Hyundai HSL810 sits above the median for its class:

  • Operating weight 7,190 lb heavier than 63% (n=334)
  • Engine power 69 hp more powerful than 56% (n=335)

Not positioned on rated operating capacity — withheld or unpublished for this machine.

◇Scale drawingdrawn to scale · mm

2000C218D3470A2822B
Side elevation
2000C1710E
Front elevation

01 Engine Specification

Engine Make 2348
Engine Model 4TNE98
Gross Power 70hp 52.2kw
Net Power 68.5hp 51.1kw
Power Measured @ 2500rpm

02 Operational Specification

Operational Weight 7187.1lb 3260kg
Fuel Capacity 21.7gal 82L
Hydraulic System Fluid Capacity 14.6gal 55L
Max Speed 7.3mph 11.8km/h
Tire Size 12X16.5

03 Loader Specification

Bucket Capacity 0.5yd3 0.4m3

04 Hydraulic Specification

Pump Flow Capacity 19.7gal/min 74.2L/min
Relief Valve Pressure 2465psi 16995.6kPa

05 Dimensions Dimensions

Length With Bucket 11.39ft in 3470mm
Width Over Tires 5.62ft in 1710mm
Ground Clearance 8.59in 218mm
Height To Top Of Cab 6.57ft in 2000mm
Wheelbase 3.43ft in 1045mm
Length W/O Bucket 9.26ft in 2822mm
Clearance At Max Lift And Dump 8.37ft in 2550mm
Reach At Max Lift And Dump 22.37in 568mm
Turning Radius From Center - Machine Rear 66.15in 1680mm
Turning Radius From Center - Inc Bucket 78.27in 1988mm

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.