Specification sheet Skid Steer Loader Ref hyundai-hsl275t-skid-steer-loader
Hyundai HSL275T
The Hyundai HSL275T is a skid steer loader with an operating weight of 2,350 lb (1,065.95 kg), a 25 hp engine, and a rated operating capacity of 420 lb (190.51 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
2,350lb
1,065.95kg
Engine power
25hp
18.7kW
Gross Power Rated operating capacity
420lb
190.51kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Hyundai HSL275T sits at the compact end of its class:
- Operating weight 2,350 lb lighter than 98% (n=334)
- Engine power 25 hp less powerful than 96% (n=335)
- Rated operating capacity 420 lb lower-rated than 100% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2334 | |
|---|---|---|
| Engine Model | D1105 | |
| Gross Power | 25hp | 18.7kw |
| Power Measured @ | 3000rpm |
02 Operational Specification
| Operational Weight | 2350lb | 1066kg |
|---|---|---|
| Fuel Capacity | 8.2gal | 30.7L |
| Max Speed | 4.5mph | 7.1km/h |
| Hydraulic System Fluid Capacity | 11.1gal | 42L |
03 Loader Specification
| Operating Load Rating | 420lb | 190.6kg |
|---|
04 Hydraulic Specification
| Pump Flow Capacity | 8.6gal/min | 32.2L/min |
|---|---|---|
| Relief Valve Pressure | 3000psi | 20684.3kPa |
05 Dimensions Dimensions
| Length With Bucket | 6.65ft in | 2026mm |
|---|---|---|
| Width Over Tires | 3.51ft in | 1067mm |
| Ground Clearance | 5.99in | 152mm |
| Height To Top Of Cab | 4.28ft in | 1302mm |
| Wheelbase | 2.52ft in | 768mm |
| Length W/O Bucket | 5.28ft in | 1607mm |
| Clearance At Max Lift And Dump | 3.84ft in | 1168mm |
| Reach At Max Lift And Dump | 10in | 254mm |
| Turning Radius From Center - Machine Rear | 38.39in | 975mm |
| Turning Radius From Center - Inc Bucket | 50.28in | 1277mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.