Specification sheet Compact Track Loader Ref hyundai-hsl275t-multi-terrain-loader
Hyundai HSL275T
The Hyundai HSL275T is a compact track loader with an operating weight of 2,350.13 lb (1,066 kg), a 25 hp engine, and a rated operating capacity of 421.09 lb (191 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
2,350.13lb
1,066kg
Engine power
25hp
18.7kW
Gross Power Rated operating capacity
421.09lb
191kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Hyundai HSL275T sits at the compact end of its class:
- Operating weight 2,350 lb lighter than 97% (n=182)
- Engine power 25 hp less powerful than 97% (n=167)
- Rated operating capacity 420 lb lower-rated than 100% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2334 | |
|---|---|---|
| Engine Model | D1105 | |
| Gross Power | 25hp | 18.7kw |
02 Operational Specification
| Operating Weight | 2350.2lb | 1066kg |
|---|---|---|
| Fuel Capacity | 8.2gal | 30.7L |
| Hydraulic System Fluid Capacity | 11.1gal | 42L |
| Max Speed - High Range | 4.5mph | 7.1km/h |
03 Loader Specification
| Operating Load | 421.1lb | 191kg |
|---|
04 Hydraulic Specification
| Pump Flow | 8.6gal/min | 32.2L/min |
|---|---|---|
| Relief Valve Pressure | 3000psi | 20684.3kPa |
05 Dimensions Dimensions
| Width Over Tracks | 3.51ft in | 1067mm |
|---|---|---|
| Height To Top Of Cab | 4.28ft in | 1302mm |
| Ground Clearance | 5.99in | 152mm |
| Clearance At Max Lift And Dump | 3.84ft in | 1168mm |
| Reach At Max Lift And Dump | 0.84ft in | 254mm |
| Length With Out Bucket | 5.28ft in | 1607mm |
| Turning Radius From Center - Inc Bucket | 50.28in | 1277mm |
| Turning Radius From Center - Machine Rear | 38.39in | 975mm |
| Length With Bucket | 6.65ft in | 2026mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.