Specification sheet Skid Steer Loader Ref hyundai-hsl240t-skid-steer-loader
Hyundai HSL240T
The Hyundai HSL240T is a skid steer loader with an operating weight of 2,200 lb (997.91 kg), a 25 hp engine, and a rated operating capacity of 370 lb (167.83 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
2,200lb
997.91kg
Engine power
25hp
18.7kW
Gross Power Rated operating capacity
370lb
167.83kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Hyundai HSL240T sits at the compact end of its class:
- Operating weight 2,200 lb lighter than 98% (n=334)
- Engine power 25 hp less powerful than 96% (n=335)
- Rated operating capacity 370 lb lower-rated than 100% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2355 | |
|---|---|---|
| Engine Model | CH25 | |
| Gross Power | 25hp | 18.7kw |
| Power Measured @ | 3600rpm |
02 Operational Specification
| Operational Weight | 2200lb | 998kg |
|---|---|---|
| Fuel Capacity | 2.2gal | 8.3L |
| Max Speed | 3.2mph | 5.1km/h |
| Hydraulic System Fluid Capacity | 11.6gal | 43.9L |
03 Loader Specification
| Operating Load Rating | 370lb | 167.9kg |
|---|
04 Hydraulic Specification
| Pump Flow Capacity | 8.6gal/min | 32.2L/min |
|---|---|---|
| Relief Valve Pressure | 3000psi | 20684.3kPa |
05 Dimensions Dimensions
| Length With Bucket | 6.61ft in | 2013mm |
|---|---|---|
| Width Over Tires | 3.53ft in | 1073mm |
| Ground Clearance | 7.41in | 188mm |
| Height To Top Of Cab | 4.25ft in | 1295mm |
| Wheelbase | 2.28ft in | 693mm |
| Length W/O Bucket | 5.05ft in | 1537mm |
| Clearance At Max Lift And Dump | 3.59ft in | 1092mm |
| Reach At Max Lift And Dump | 10in | 254mm |
| Turning Radius From Center - Machine Rear | 36.26in | 921mm |
| Turning Radius From Center - Inc Bucket | 47.37in | 1203mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.