Specification sheet Compact Track Loader Ref hyundai-hsl240t-multi-terrain-loader
Hyundai HSL240T
The Hyundai HSL240T is a compact track loader with an operating weight of 2,200.22 lb (998 kg), and a 25 hp engine.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
2,200.22lb
998kg
Engine power
25hp
18.7kW
Gross Power ◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Hyundai HSL240T sits at the compact end of its class:
- Operating weight 2,200 lb lighter than 98% (n=182)
- Engine power 25 hp less powerful than 97% (n=167)
Not positioned on rated operating capacity — withheld or unpublished for this machine.
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2355 | |
|---|---|---|
| Engine Model | CH25 | |
| Gross Power | 25hp | 18.7kw |
02 Operational Specification
| Operating Weight | 2200.3lb | 998kg |
|---|---|---|
| Fuel Capacity | 2.2gal | 8.3L |
| Hydraulic System Fluid Capacity | 11.6gal | 43.9L |
| Max Speed - Low Range | 3.2mph | 5.1km/h |
03 Hydraulic Specification
| Pump Flow | 8.6gal/min | 32.2L/min |
|---|---|---|
| Relief Valve Pressure | 3000psi | 20684.3kPa |
04 Dimensions Dimensions
| Width Over Tracks | 3.53ft in | 1073mm |
|---|---|---|
| Height To Top Of Cab | 4.25ft in | 1295mm |
| Ground Clearance | 7.41in | 188mm |
| Clearance At Max Lift And Dump | 3.59ft in | 1092mm |
| Reach At Max Lift And Dump | 0.84ft in | 254mm |
| Length With Out Bucket | 5.05ft in | 1537mm |
| Turning Radius From Center - Inc Bucket | 47.37in | 1203mm |
| Turning Radius From Center - Machine Rear | 36.26in | 921mm |
| Length With Bucket | 6.61ft in | 2013mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.