The Hyundai HSL215T is a skid steer loader with an operating weight of 1,750 lb (793.79 kg), a 25 hp engine, a rated operating capacity of 475 lb (215.46 kg), and a tipping load of 950.2 lb (431 kg).
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Hyundai HSL215T sits at the compact end of its class:
Operating weight1,750 lblighter than 100%(n=334)
Engine power25 hpless powerful than 96%(n=335)
Rated operating capacity480 lblower-rated than 99%(n=288)
◇Scale drawingdrawn to scale · mm
Side elevationFront elevation
01 Engine Specification
Engine Make
2355
Engine Model
CH25
Gross Power
25hp
18.7kw
Power Measured @
3600rpm
02 Operational Specification
Operational Weight
1750lb
793.8kg
Fuel Capacity
2.2gal
8.3L
Max Speed
3mph
4.8km/h
Hydraulic System Fluid Capacity
11.6gal
43.9L
Tire Size
18 8.5-8
03 Loader Specification
Operating Load Rating
475lb
215.5kg
04 Hydraulic Specification
Pump Flow Capacity
8.6gal/min
32.2L/min
Relief Valve Pressure
3000psi
20684.3kPa
05 Dimensions Dimensions
A Length With Bucket
6.61ft in
2013mm
E Width Over Tires
3.31ft in
1006mm
D Ground Clearance
4.38in
111mm
C Height To Top Of Cab
4.13ft in
1257mm
Wheelbase
2.28ft in
693mm
B Length W/O Bucket
5.05ft in
1537mm
Clearance At Max Lift And Dump
3.46ft in
1054mm
Reach At Max Lift And Dump
20.24in
514mm
Turning Radius From Center - Machine Rear
36.26in
921mm
Turning Radius From Center - Inc Bucket
47.37in
1203mm
Data notes
†
Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.