Specification sheet Compact Track Loader Ref hyundai-hsl1500t-multi-terrain-loader

Hyundai HSL1500T

The Hyundai HSL1500T is a compact track loader with an operating weight of 10,500.62 lb (4,763 kg), a 83 hp engine, a rated operating capacity of 3,201.12 lb (1,452 kg), and a tipping load of 6,400.1 lb (2,903.04 kg).

✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld →
Operating weight
10,500.62lb
4,763kg
Engine power
83hp
61.9kW
Net Power
Rated operating capacity
3,201.12lb
1,452kg
Tipping load
6,400.1lb † — value reconstructed from related published figures
2,903.04kg

◆Where it sits in its classpercentile · compact track loaders

Among 184 compact track loaders , the Hyundai HSL1500T sits above the median for its class:

  • Operating weight 10,500 lb heavier than 78% (n=182)
  • Engine power 83 hp more powerful than 72% (n=167)
  • Rated operating capacity 3,200 lb higher-rated than 72% (n=156)

◇Scale drawingdrawn to scale · mm

2134C229D3708A2985B
Side elevation
2134C1798E
Front elevation

01 Engine Specification

Engine Make 2334
Engine Model V3300T
Net Power 83hp 61.9kw

02 Operational Specification

Operating Weight 10500.7lb 4763kg
Fuel Capacity 28.8gal 109L
Hydraulic System Fluid Capacity 24gal 90.8L
Max Speed - Low Range 6.8mph 10.9km/h

03 Loader Specification

Operating Load 3201.2lb 1452kg

04 Hydraulic Specification

Pump Flow 21.1gal/min 79.5L/min
Relief Valve Pressure 3000psi 20684.3kPa

05 Dimensions Dimensions

Width Over Tracks 5.9ft in 1798mm
Height To Top Of Cab 7.01ft in 2134mm
Ground Clearance 9.02in 229mm
Clearance At Max Lift And Dump 7.91ft in 2408mm
Reach At Max Lift And Dump 2.17ft in 660mm
Length With Bucket 12.17ft in 3708mm
Length With Out Bucket 9.8ft in 2985mm

Data notes

†

Derived value. tipping load was not published directly in a usable form by the source. It was reconstructed from related published figures and accepted only after validating against the expected relationship between specifications for this machine class.

Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.