Specification sheet Wheel Loader Ref hyundai-hl760-9a-wheel-loader
Hyundai HL760-9A
The Hyundai HL760-9A is a wheel loader with an operating weight of 40,454.83 lb (18,350 kg), a 222.7 hp engine, and a 4.32 yd³ (3.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
40,454.83lb
18,350kg
Engine power
222.7hp
166kW
Net Power Bucket capacity
4.32yd³
3.3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Hyundai HL760-9A sits at the heavy end of its class:
- Operating weight 40,450 lb heavier than 86% (n=439)
- Engine power 223 hp more powerful than 91% (n=408)
- Bucket capacity 4.3 yd³ larger-bucket than 87% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Emissions Certification | Tier 4 interim | |
|---|---|---|
| Number Of Cylinders | 6 | |
| Max Torque Iso Tr14396 | 700lb ft | 949.1Nm |
| Engine Make | CUMMINS | |
| Engine Model | QSB6.7 | |
| Engine Type | Watercooled | |
| Net Power | 222.7hp | 166kw |
| Air Cleaner | Dry, two stage dual elements | |
| Gross Power | 225.3hp | 168kw |
| Power Measured @ | 2100rpm | |
| Displacement | 408.9cu in | 6.7L |
| Torque Measured @ | 1500rpm | |
| Aspiration | Turbocharged | |
| Fuel Type | Diesel | |
| Bore | 4.3in | 107mm |
| Stroke | 4.9in | 124mm |
02 Operational Specification
| Operating Weight | 40454.9lb | 18350kg |
|---|---|---|
| Fuel Capacity | 86.4gal | 327L |
| Hydraulic System Fluid Capacity | 47.1gal | 178L |
| Engine Oil Fluid Capacity | 4.8gal | 18L |
| Cooling System Fluid Capacity | 11.4gal | 43L |
| Transmission Fluid Capacity | 8.5gal | 32L |
| Front Axle/Diff Fluid Capacity | 9.3gal | 35L |
| Rear Axle/Diff Fluid Capacity | 9.3gal | 35L |
| Static Tipping Weight | 31526.2lb | 14300kg |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 23.5-25, 20 PR, L3 |
03 Transmission Specification
| Transmission Type | Full automatic power shif | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.9mph | 38.5km/h |
| Max Speed - Reverse | 25.2mph | 40.6km/h |
04 Hydraulic System Specification
| Pump Flow Capacity | 61.6gal/min | 233L/min |
|---|---|---|
| Raise Time | 5.8sec | |
| Dump Time | 1.2sec | |
| Lower Time | 3.1sec | |
| Pump Type | Load sensing hydraulic syste |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.75ft in | 2970mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.32yd3 | 3.3m3 |
| Bucket Capacity - Struck | 3.67yd3 | 2.8m3 |
| Bucket Width | 9.52ft in | 2900mm |
| Breakout Force | 35780.59lb | 159.16kN |
06 Dimensions Dimensions
| Ground Clearance | 1.38ft in | 420mm |
|---|---|---|
| Length With Bucket On Ground | 26.58ft in | 8100mm |
| Width Over Tires | 9.09ft in | 2770mm |
| Height To Top Of Cab | 11.32ft in | 3450mm |
| Wheelbase | 10.83ft in | 3300mm |
| Hinge Pin - Max Height | 18.3ft in | 5575mm |
| Reach At Max Lift And Dump | 4.01ft in | 1220mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.