Specification sheet Wheel Loader Ref hyundai-hl757xtd-9-wheel-loader
Hyundai HL757XTD-9
The Hyundai HL757XTD-9 is a wheel loader with an operating weight of 33,069.34 lb (15,000 kg), a 170 hp engine, and a 3.54 yd³ (2.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
33,069.34lb
15,000kg
Engine power
170hp
126.8kW
Net Power Bucket capacity
3.54yd³
2.7m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Hyundai HL757XTD-9 sits in the middle of its class:
- Operating weight 33,070 lb heavier than 59% (n=439)
- Engine power 170 hp more powerful than 55% (n=408)
- Bucket capacity 3.5 yd³ larger-bucket than 61% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | QSB6.7 | |
| Net Power | 170hp | 126.8kw |
| Gross Power | 173hp | 129.1kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 600lb ft | 813.5Nm |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 33069.4lb | 15000kg |
|---|---|---|
| Fuel Capacity | 77.7gal | 294L |
| Hydraulic System Fluid Capacity | 56.8gal | 215L |
| Engine Oil Fluid Capacity | 4.8gal | 18L |
| Cooling System Fluid Capacity | 9.3gal | 35L |
| Transmission Fluid Capacity | 7.4gal | 28L |
| Front Axle/Diff Fluid Capacity | 7.7gal | 29L |
| Rear Axle/Diff Fluid Capacity | 6.4gal | 24L |
| Static Tipping Weight | 21781.7lb | 9880kg |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 20.5-25 |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23.5mph | 37.7km/h |
| Max Speed - Reverse | 15.1mph | 24.2km/h |
04 Hydraulic System Specification
| Pump Flow Capacity | 48.9gal/min | 185L/min |
|---|---|---|
| Raise Time | 5.9sec | |
| Dump Time | 1.1sec | |
| Lower Time | 3.8sec | |
| Pump Type | Variable Axial Piston |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.6ft in | 3230mm |
|---|---|---|
| Bucket Capacity - Struck | 3.14yd3 | 2.4m3 |
| Bucket Capacity - Heaped | 3.54yd3 | 2.7m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.35ft in | 410mm |
|---|---|---|
| Length With Bucket On Ground | 26.22ft in | 7990mm |
| Width Over Tires | 8.99ft in | 2740mm |
| Height To Top Of Cab | 10.86ft in | 3310mm |
| Wheelbase | 10.01ft in | 3050mm |
| Hinge Pin - Max Height | 14.15ft in | 4310mm |
| Reach At Max Lift And Dump | 3.61ft in | 1100mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.