Specification sheet Wheel Loader Ref hyundai-hl740xtd-9-wheel-loader
Hyundai HL740XTD-9
The Hyundai HL740XTD-9 is a wheel loader with an operating weight of 27,116.86 lb (12,300 kg), a 143 hp engine, and a 3.01 yd³ (2.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
27,116.86lb
12,300kg
Engine power
143hp
106.7kW
Net Power Bucket capacity
3.01yd³
2.3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Hyundai HL740XTD-9 sits below the median for its class:
- Operating weight 27,120 lb lighter than 72% (n=439)
- Engine power 143 hp less powerful than 71% (n=408)
- Bucket capacity 3 yd³ smaller-bucket than 60% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | QSB6.7 | |
| Net Power | 143hp | 106.7kw |
| Gross Power | 145hp | 108.2kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 499lb ft | 676.6Nm |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 27116.9lb | 12300kg |
|---|---|---|
| Fuel Capacity | 58.2gal | 220L |
| Hydraulic System Fluid Capacity | 48.7gal | 184L |
| Engine Oil Fluid Capacity | 4.8gal | 18L |
| Cooling System Fluid Capacity | 9gal | 34L |
| Transmission Fluid Capacity | 6.7gal | 25L |
| Front Axle/Diff Fluid Capacity | 5.8gal | 21.8L |
| Rear Axle/Diff Fluid Capacity | 5.8gal | 21.8L |
| Static Tipping Weight | 18915.7lb | 8580kg |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20.5-25 |
03 Transmission Specification
| Transmission Type | Powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24.3mph | 39km/h |
| Max Speed - Reverse | 15.6mph | 25.1km/h |
04 Hydraulic System Specification
| Pump Flow Capacity | 41gal/min | 155L/min |
|---|---|---|
| Raise Time | 5.5sec | |
| Dump Time | 1.1sec | |
| Lower Time | 3sec | |
| Pump Type | Variable Axial Piston |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.54ft in | 3210mm |
|---|---|---|
| Bucket Capacity - Struck | 2.62yd3 | 2m3 |
| Bucket Capacity - Heaped | 3.01yd3 | 2.3m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.37ft in | 417mm |
|---|---|---|
| Length With Bucket On Ground | 25.69ft in | 7830mm |
| Width Over Tires | 8.54ft in | 2600mm |
| Height To Top Of Cab | 10.7ft in | 3260mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 13.92ft in | 4240mm |
| Reach At Max Lift And Dump | 3.35ft in | 1020mm |
?Questions & answersfrom this machine's data
- How much does a Hyundai HL740XTD-9 wheel loader weigh?
- A Hyundai HL740XTD-9 wheel loader has an operating weight of 27,116.9 lb (12,300 kg).
- What engine does a Hyundai HL740XTD-9 wheel loader have?
- A Hyundai HL740XTD-9 wheel loader is powered by a QSB6.7 engine producing 143 hp (106.7 kW).
- What size bucket does a Hyundai HL740XTD-9 wheel loader have?
- A Hyundai HL740XTD-9 wheel loader has a bucket capacity of 3 yd³ (2.3 m³).
- How much fuel does a Hyundai HL740XTD-9 wheel loader hold?
- A Hyundai HL740XTD-9 wheel loader has a fuel capacity of 58.2 gal (220 L).
- What is the ground clearance of a Hyundai HL740XTD-9 wheel loader?
- A Hyundai HL740XTD-9 wheel loader has a ground clearance of 1.4 ft (417 mm).
- How long is a Hyundai HL740XTD-9 wheel loader?
- A Hyundai HL740XTD-9 wheel loader has an overall length of 25.7 ft (7,830 mm) with the bucket on the ground.
- How fast does a Hyundai HL740XTD-9 wheel loader travel?
- A Hyundai HL740XTD-9 wheel loader has a maximum forward travel speed of 24.3 mph (39 km/h).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.