Specification sheet Wheel Loader Ref hyundai-hl740-9a-wheel-loader
Hyundai HL740-9A
The Hyundai HL740-9A is a wheel loader with an operating weight of 28,000 lb (12,700.59 kg), a 156 hp engine, and a 3.01 yd³ (2.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
28,000lb
12,700.59kg
Engine power
156hp
116.4kW
Net Power Bucket capacity
3.01yd³
2.3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Hyundai HL740-9A sits below the median for its class:
- Operating weight 28,000 lb lighter than 66% (n=439)
- Engine power 156 hp less powerful than 58% (n=408)
- Bucket capacity 3 yd³ smaller-bucket than 60% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | CUMMINS | |
| Engine Model | QSB6.7 | |
| Net Power | 156hp | 116.4kw |
| Air Cleaner | Dry, Two stages dual elements | |
| Gross Power | 158hp | 117.9kw |
| Torque | 591lb ft | 801.3Nm |
| Power Measured @ | 2100rpm | |
| Displacement | 408.9cu in | 6.7L |
| Aspiration | Turbocharged, | |
| Bore | 4.3in | 107mm |
| Stroke | 4.9in | 124mm |
02 Operational Specification
| Operating Weight | 28000lb | 12700.6kg |
|---|---|---|
| Fuel Capacity | 58.2gal | 220L |
| Hydraulic System Fluid Capacity | 45.5gal | 172L |
| Cooling System Fluid Capacity | 9gal | 34L |
| Transmission Fluid Capacity | 6.7gal | 25L |
| Front Axle/Diff Fluid Capacity | 6.4gal | 24L |
| Rear Axle/Diff Fluid Capacity | 6.1gal | 23L |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Tire Size | 20.5-25, L3 |
03 Transmission Specification
| Transmission Type | Full automatic power shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 24.5mph | 39.5km/h |
| Max Speed - Reverse | 25.3mph | 40.8km/h |
04 Hydraulic System Specification
| Raise Time | 5.5sec | |
|---|---|---|
| Dump Time | 1.1sec | |
| Lower Time | 3sec | |
| Pump Type | Variable axial piston type, |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.14ft in | 2785mm |
|---|---|---|
| Breakout Force | 24800lb | 110.32kN |
| Bucket Capacity - Heaped | 3.01yd3 | 2.3m3 |
| Bucket Capacity - Struck | 2.62yd3 | 2m3 |
06 Dimensions Dimensions
| Ground Clearance | 1.37ft in | 417mm |
|---|---|---|
| Length With Bucket On Ground | 24.1ft in | 7345mm |
| Height To Top Of Cab | 10.7ft in | 3260mm |
| Wheelbase | 9.52ft in | 2900mm |
| Reach At Max Lift And Dump | 3.37ft in | 1025mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.