Specification sheet Wheel Loader Ref hyundai-hl740-7a-wheel-loader
Hyundai HL740-7A
The Hyundai HL740-7A is a wheel loader with an operating weight of 25,463.39 lb (11,550 kg), a 145 hp engine, and a 2.75 yd³ (2.1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
25,463.39lb
11,550kg
Engine power
145hp
108.2kW
Net Power Bucket capacity
2.75yd³
2.1m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Hyundai HL740-7A sits below the median for its class:
- Operating weight 25,460 lb lighter than 81% (n=439)
- Engine power 145 hp less powerful than 69% (n=408)
- Bucket capacity 2.8 yd³ smaller-bucket than 70% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Max. Torque - Iso Tr14396 | 499lb ft | 676.6Nm |
| Engine Make | CUMMINS | |
| Engine Model | QSB6.7 | |
| Net Power | 145hp | 108.2kw |
| Air Cleaner | Dry, dual elements | |
| Gross Power | 138hp | 103kw |
| Power Measured @ | 2100rpm | |
| Displacement | 408.9cu in | 6.7L |
| Torque Measured @ | 1400rpm | |
| Bore | 4.3in | 107mm |
| Stroke | 4.9in | 124mm |
02 Operational Specification
| Operating Weight | 25463.4lb | 11550kg |
|---|---|---|
| Fuel Capacity | 60.3gal | 228L |
| Hydraulic System Fluid Capacity | 43.6gal | 165L |
| Cooling System Fluid Capacity | 9.3gal | 35L |
| Transmission Fluid Capacity | 6.4gal | 24L |
| Front Axle/Diff Fluid Capacity | 5.7gal | 21.2L |
| Rear Axle/Diff Fluid Capacity | 5.7gal | 21.2L |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 20.5-25, 16 PR, L3 |
03 Transmission Specification
| Transmission Type | 3-elements, single-stage | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 22.6mph | 36.4km/h |
| Max Speed - Reverse | 14.5mph | 23.4km/h |
04 Hydraulic System Specification
| Pump Flow Capacity | 47.3gal/min | 179L/min |
|---|---|---|
| Raise Time | 5.6sec | |
| Dump Time | 1.8sec | |
| Lower Time | 2.8sec | |
| Pump Type | Open-centered |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.36ft in | 2850mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.75yd3 | 2.1m3 |
| Bucket Capacity - Struck | 2.33yd3 | 1.78m3 |
| Breakout Force | 20240lb | 90.04kN |
06 Dimensions Dimensions
| Ground Clearance | 1.37ft in | 417mm |
|---|---|---|
| Length With Bucket On Ground | 23.86ft in | 7270mm |
| Height To Top Of Cab | 10.7ft in | 3260mm |
| Wheelbase | 9.52ft in | 2900mm |
| Reach At Max Lift And Dump | 31.84ft in | 9703mm |
| Overall Width | 8.37ft in | 2550mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.