Specification sheet Wheel Loader Ref hyundai-hl730tm-7a-wheel-loader
Hyundai HL730TM-7A
The Hyundai HL730TM-7A is a wheel loader with an operating weight of 10,000 lb (4,535.93 kg), a 119 hp engine, and a 2.1 yd³ (1.61 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,000lb
4,535.93kg
Engine power
119hp
88.8kW
Net Power Bucket capacity
2.1yd³
1.61m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Hyundai HL730TM-7A sits below the median for its class:
- Operating weight 10,000 lb lighter than 75% (n=374)
- Engine power 119 hp more powerful than 93% (n=367)
- Bucket capacity 2.1 yd³ larger-bucket than 83% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2347 | |
|---|---|---|
| Engine Model | QSB4.5 | |
| Net Power | 119hp | 88.8kw |
| Gross Power | 125hp | 93.3kw |
| Max Torque | 408lb ft | 553.2Nm |
| Displacement | 274.7cu in | 4.5L |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 10000lb | 4536kg |
|---|---|---|
| Fuel Capacity | 53.4gal | 202L |
| Hydraulic System Fluid Capacity | 42.3gal | 160L |
| Engine Oil Fluid Capacity | 3gal | 11L |
| Cooling System Fluid Capacity | 8gal | 30L |
| Transmission Fluid Capacity | 5.3gal | 20L |
| Front Axle/Diff Fluid Capacity | 4.9gal | 18.4L |
| Rear Axle/Diff Fluid Capacity | 4.9gal | 18.4L |
| Static Tipping Weight | 14640lb | 6640.6kg |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 17.5-25 12 PR L3 |
03 Transmission Specification
| Transmission Type | full automatic powershift, countershaft type | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 22.4mph | 36km/h |
| Max Speed - Reverse | 14.4mph | 23.1km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2990psi | 20615.4kPa |
|---|---|---|
| Pump Flow Capacity | 37gal/min | 140L/min |
| Raise Time | 5.6sec | |
| Dump Time | 1.4sec | |
| Lower Time | 2.8sec | |
| Pump Type | helical gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.14ft in | 2785mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.1yd3 | 1.61m3 |
| Bucket Capacity - Struck | 1.8yd3 | 1.38m3 |
| Breakout Force | 22240lb | 22240- |
06 Dimensions Dimensions
| Ground Clearance | 1.22ft in | 370mm |
|---|---|---|
| Length With Bucket On Ground | 22.97ft in | 7000mm |
| Width Over Tires | 7.88ft in | 2400mm |
| Height To Top Of Cab | 10.41ft in | 3170mm |
| Wheelbase | 9.03ft in | 2750mm |
| Hinge Pin - Max Height | 12.41ft in | 3780mm |
| Reach At Max Lift And Dump | 3.75ft in | 1140mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.