Hitachi ZX60USB-3
The Hitachi ZX60USB-3 is a mini excavator with an operating weight of 13,653.3 lb, and a 54.4 hp engine.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Hitachi ZX60USB-3 sits at the heavy end of its class:
- Operating weight 13,650 lb heavier than 94% (n=438)
- Engine power 54 hp more powerful than 95% (n=448)
Not positioned on dig depth — withheld or unpublished for this machine.
01 Boom/Stick Option (Hex) 1 Specification
| Max Digging Height | 19.56ft in | 5,962mm‖ — metric converted from the published imperial value |
|---|---|---|
| Boom/Stick Option (Hex) 1 | Mono Boom | |
| Max Digging Reach | 12.37ft in | 3,770mm‖ — metric converted from the published imperial value |
| Max.Dumping Height | 13.69ft in | 4,173mm‖ — metric converted from the published imperial value |
02 Dimensions Specification
| Length Of Track On Ground | 6.53ft in | 1,990mm‖ — metric converted from the published imperial value |
|---|---|---|
| Ground Clearance | 1.12ft in | 341mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 4.27ft in | 1,301mm‖ — metric converted from the published imperial value |
| Track Gauge | 5.25ft in | 1,600mm‖ — metric converted from the published imperial value |
| Width Over Tracks | 6.57ft in | 2,003mm‖ — metric converted from the published imperial value |
| Overall Undercarriage Width | 6.57ft in | 2,003mm‖ — metric converted from the published imperial value |
| Track Shoe Width | 1.32ft in | 402mm‖ — metric converted from the published imperial value |
| Transport Length Mono Boom | 18.9ft in | 5,761mm‖ — metric converted from the published imperial value |
03 Engine Specification
| Emission Tier Level | Interim Tier 4 | |
|---|---|---|
| Number Of Cylinders | 4 | |
| Engine Model | HITACHI ZX 60 USB-3 | |
| Net Power | 54.4hp | 40.6kw‖ — metric converted from the published imperial value |
| Displacement | 195.3cu in | 3,200cm3‖ — metric converted from the published imperial value |
04 Capacities Specification
| Fuel Tank | 31.8gal | 120l‖ — metric converted from the published imperial value |
|---|
05 Performance Specification
| Ground Bearing Pressure | 5psi | 34kpa‖ — metric converted from the published imperial value |
|---|---|---|
| Dipper Tearout | 6969.1lb | 3,161.1kg‖ — metric converted from the published imperial value |
06 Weights Specification
| Operating Weight | 13653.3lb | 6,193.03kg‖ — metric converted from the published imperial value |
|---|
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.