Specification sheet Wheel Loader Ref hitachi-zw250-wheel-loader
Hitachi ZW250
The Hitachi ZW250 is a wheel loader with an operating weight of 43,166.52 lb (19,580 kg), a 240 hp engine, and a 4.45 yd³ (3.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
43,166.52lb
19,580kg
Engine power
240hp
179kW
Net Power Bucket capacity
4.45yd³
3.4m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Hitachi ZW250 sits at the heavy end of its class:
- Operating weight 43,170 lb heavier than 95% (n=439)
- Engine power 240 hp more powerful than 96% (n=408)
- Bucket capacity 4.5 yd³ larger-bucket than 90% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2353 | |
| Engine Model | AH-6HK1X | |
| Net Power | 240hp | 179kw |
| Power Measured @ | 2000rpm | |
| Displacement | 475.4cu in | 7.8L |
| Aspiration | Turbocharger & Intercooled |
02 Operational Specification
| Operating Weight | 43166.6lb | 19580kg |
|---|---|---|
| Fuel Capacity | 89.9gal | 340L |
| Hydraulic System Fluid Capacity | 30.2gal | 114L |
| Engine Oil Fluid Capacity | 6.7gal | 25L |
| Cooling System Fluid Capacity | 10.9gal | 41L |
| Transmission Fluid Capacity | 6.7gal | 25L |
| Front Axle/Diff Fluid Capacity | 10.6gal | 40L |
| Rear Axle/Diff Fluid Capacity | 10.6gal | 40L |
| Static Tipping Weight | 33841lb | 15350kg |
| Turning Radius | 18.8ft in | 5715mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 23.5-25-16PR (L3) tubeless, nylon body |
03 Transmission Specification
| Transmission Type | Torque converter, countershaft type powershift with computer controlled automatic shift and manual shift features included | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.5mph | 34.5km/h |
| Max Speed - Reverse | 21.5mph | 34.5km/h |
04 Hydraulic System Specification
| Raise Time | 5.6sec | |
|---|---|---|
| Dump Time | 1.3sec | |
| Lower Time | 3.2sec | |
| Pump Type | variable displacement axial piston pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.36ft in | 2850mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.45yd3 | 3.4m3 |
| Bucket Capacity - Struck | 3.8yd3 | 2.9m3 |
| Bucket Width | 10.01ft in | 3050mm |
| Breakout Force | 41140.04lb | 183kN |
06 Dimensions Dimensions
| Ground Clearance | 1.4ft in | 425mm |
|---|---|---|
| Length With Bucket On Ground | 27.94ft in | 8515mm |
| Width Over Tires | 9.29ft in | 2830mm |
| Height To Top Of Cab | 11.18ft in | 3405mm |
| Wheelbase | 11ft in | 3350mm |
| Hinge Pin - Max Height | 13.77ft in | 4195mm |
| Reach At Max Lift And Dump | 3.94ft in | 1200mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.