Specification sheet Wheel Loader Ref hitachi-zw220-wheel-loader
Hitachi ZW220
The Hitachi ZW220 is a wheel loader with an operating weight of 38,029.75 lb (17,250 kg), a 220 hp engine, and a 4.06 yd³ (3.1 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
38,029.75lb
17,250kg
Engine power
220hp
164kW
Net Power Bucket capacity
4.06yd³
3.1m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Hitachi ZW220 sits above the median for its class:
- Operating weight 38,030 lb heavier than 77% (n=439)
- Engine power 220 hp more powerful than 89% (n=408)
- Bucket capacity 4.1 yd³ larger-bucket than 79% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2353 | |
| Engine Model | AH-6HK1X | |
| Net Power | 220hp | 164kw |
| Power Measured @ | 2000rpm | |
| Displacement | 475.4cu in | 7.8L |
| Aspiration | Turbocharger & Intercooled |
02 Operational Specification
| Operating Weight | 38029.8lb | 17250kg |
|---|---|---|
| Fuel Capacity | 75.3gal | 285L |
| Hydraulic System Fluid Capacity | 30.2gal | 114L |
| Engine Oil Fluid Capacity | 6.7gal | 25L |
| Cooling System Fluid Capacity | 10.1gal | 38L |
| Transmission Fluid Capacity | 6.7gal | 25L |
| Front Axle/Diff Fluid Capacity | 8.5gal | 32L |
| Rear Axle/Diff Fluid Capacity | 9gal | 34L |
| Static Tipping Weight | 30864.8lb | 14000kg |
| Turning Radius | 18.5ft in | 5620mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 23.5-25-16PR (L3) |
03 Transmission Specification
| Transmission Type | Torque converter, countershaft type powershift with computer controlled automatic shift and manual shift features included | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.5mph | 34.5km/h |
| Max Speed - Reverse | 21.5mph | 34.5km/h |
04 Hydraulic System Specification
| Raise Time | 5.6sec | |
|---|---|---|
| Dump Time | 1.4sec | |
| Lower Time | 3.5sec | |
| Pump Type | variable displacement axial plunger pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.22ft in | 2810mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.06yd3 | 3.1m3 |
| Bucket Capacity - Struck | 3.41yd3 | 2.6m3 |
| Bucket Width | 9.55ft in | 2910mm |
| Breakout Force | 37992.71lb | 169kN |
06 Dimensions Dimensions
| Ground Clearance | 1.48ft in | 450mm |
|---|---|---|
| Length With Bucket On Ground | 27.38ft in | 8345mm |
| Width Over Tires | 9.14ft in | 2785mm |
| Height To Top Of Cab | 11.08ft in | 3375mm |
| Wheelbase | 10.83ft in | 3300mm |
| Hinge Pin - Max Height | 13.42ft in | 4090mm |
| Reach At Max Lift And Dump | 3.94ft in | 1200mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.