Specification sheet Wheel Loader Ref hitachi-zw180-wheel-loader
Hitachi ZW180
The Hitachi ZW180 is a wheel loader with an operating weight of 31,482.02 lb (14,280 kg), a 171 hp engine, and a 3.67 yd³ (2.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
31,482.02lb
14,280kg
Engine power
171hp
128kW
Gross Power Bucket capacity
3.67yd³
2.8m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Hitachi ZW180 sits in the middle of its class:
- Operating weight 31,480 lb heavier than 54% (n=439)
- Engine power 171 hp more powerful than 58% (n=408)
- Bucket capacity 3.7 yd³ larger-bucket than 66% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2347 | |
|---|---|---|
| Engine Model | QSB6.7 | |
| Gross Power | 171hp | 128kw |
| Displacement | 408.3cu in | 6.7L |
| Aspiration | Turbocharger & charge air cooled |
02 Operational Specification
| Operating Weight | 31482.1lb | 14280kg |
|---|---|---|
| Fuel Capacity | 60.8gal | 230L |
| Hydraulic System Fluid Capacity | 26.5gal | 100L |
| Engine Oil Fluid Capacity | 6.7gal | 25L |
| Cooling System Fluid Capacity | 6.9gal | 26L |
| Transmission Fluid Capacity | 8gal | 30L |
| Front Axle/Diff Fluid Capacity | 7.4gal | 28L |
| Rear Axle/Diff Fluid Capacity | 7.4gal | 28L |
| Static Tipping Weight | 25309.1lb | 11480kg |
| Turning Radius | 17.2ft in | 5230mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 65amps | |
| Tire Size | 20.5-25-12PR (L3) |
03 Transmission Specification
| Transmission Type | Torque converter, countershaft type powershit with computer controlled automatic shift and manual shift features included | |
|---|---|---|
| Max Speed - Forward | 23.7mph | 38km/h |
| Max Speed - Reverse | 23.7mph | 38km/h |
04 Hydraulic System Specification
| Raise Time | 5.7sec | |
|---|---|---|
| Dump Time | 1.2sec | |
| Lower Time | 2.9sec | |
| Pump Type | variable displacement axial plunger |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.16ft in | 2790mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.67yd3 | 2.8m3 |
| Bucket Capacity - Struck | 3.14yd3 | 2.4m3 |
| Bucket Width | 8.83ft in | 2690mm |
| Breakout Force | 26752.27lb | 119kN |
06 Dimensions Dimensions
| Ground Clearance | 1.3ft in | 395mm |
|---|---|---|
| Length With Bucket On Ground | 24.97ft in | 7610mm |
| Width Over Tires | 8.57ft in | 2610mm |
| Height To Top Of Cab | 10.77ft in | 3280mm |
| Wheelbase | 10.01ft in | 3050mm |
| Hinge Pin - Max Height | 12.87ft in | 3920mm |
| Reach At Max Lift And Dump | 3.52ft in | 1070mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.