Specification sheet Wheel Loader Ref hitachi-zw-310-wheel-loader
Hitachi ZW-310
The Hitachi ZW-310 is a wheel loader with an operating weight of 49,119 lb (22,280 kg), a 295 hp engine, and a 5.11 yd³ (3.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
49,119lb
22,280kg
Engine power
295hp
220kW
Net Power Bucket capacity
5.11yd³
3.9m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Hitachi ZW-310 sits below the median for its class:
- Operating weight 49,120 lb lighter than 79% (n=198)
- Engine power 295 hp more powerful than 64% (n=190)
- Bucket capacity 5.1 yd³ smaller-bucket than 76% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2346 | |
| Engine Model | OM460LA | |
| Net Power | 295hp | 220kw |
| Power Measured @ | 1800rpm | |
| Displacement | 782.1cu in | 12.9L |
| Aspiration | Turbocharger & intercooled |
02 Operational Specification
| Operating Weight | 49119lb | 22280kg |
|---|---|---|
| Fuel Capacity | 101gal | 382L |
| Hydraulic System Fluid Capacity | 33.9gal | 128L |
| Engine Oil Fluid Capacity | 10.4gal | 39L |
| Cooling System Fluid Capacity | 15.6gal | 59L |
| Transmission Fluid Capacity | 6.7gal | 25L |
| Front Axle/Diff Fluid Capacity | 12.7gal | 48L |
| Rear Axle/Diff Fluid Capacity | 12.7gal | 48L |
| Static Tipping Weight | 38801.4lb | 17600kg |
| Turning Radius | 19.4ft in | 5900mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 26.5-25-16PR (L3) |
03 Transmission Specification
| Transmission Type | Torque converter, countershaft type powershift with computer-controlled automatic shift and manual shit features included | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.5mph | 34.5km/h |
| Max Speed - Reverse | 21.5mph | 34.5km/h |
04 Hydraulic System Specification
| Raise Time | 5.8sec | |
|---|---|---|
| Dump Time | 1.4sec | |
| Lower Time | 3sec | |
| Pump Type | variable displacement axial plunger pump |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.85ft in | 3000mm |
|---|---|---|
| Bucket Capacity - Heaped | 5.11yd3 | 3.9m3 |
| Bucket Capacity - Struck | 4.32yd3 | 3.3m3 |
| Bucket Width | 10.34ft in | 3150mm |
| Breakout Force | 47884.31lb | 213kN |
06 Dimensions Dimensions
| Ground Clearance | 1.6ft in | 485mm |
|---|---|---|
| Length With Bucket On Ground | 29.37ft in | 8950mm |
| Width Over Tires | 9.88ft in | 3010mm |
| Height To Top Of Cab | 11.37ft in | 3465mm |
| Wheelbase | 11.32ft in | 3450mm |
| Hinge Pin - Max Height | 14.42ft in | 4395mm |
| Reach At Max Lift And Dump | 4.27ft in | 1300mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.