Specification sheet Wheel Loader Ref hitachi-lx80-7-wheel-loader
Hitachi LX80-7
The Hitachi LX80-7 is a wheel loader with an operating weight of 17,901.54 lb (8,120 kg), a 108 hp engine, and a 2.1 yd³ (1.6 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
17,901.54lb
8,120kg
Engine power
108hp
80.9kW
Net Power Bucket capacity
2.1yd³
1.6m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Hitachi LX80-7 sits above the median for its class:
- Operating weight 17,900 lb heavier than 78% (n=374)
- Engine power 108 hp more powerful than 87% (n=367)
- Bucket capacity 2.1 yd³ larger-bucket than 83% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2353 | |
| Engine Model | DD-4BG1T | |
| Net Power | 108hp | 80.9kw |
| Power Measured @ | 2200rpm | |
| Displacement | 264.2cu in | 4.4L |
| Aspiration | Turbocharger |
02 Operational Specification
| Operating Weight | 17901.6lb | 8120kg |
|---|---|---|
| Fuel Capacity | 41gal | 155L |
| Hydraulic System Fluid Capacity | 13.3gal | 50L |
| Engine Oil Fluid Capacity | 3.5gal | 13L |
| Cooling System Fluid Capacity | 6.1gal | 23L |
| Front Axle/Diff Fluid Capacity | 3.7gal | 14L |
| Rear Axle/Diff Fluid Capacity | 3.7gal | 14L |
| Static Tipping Weight | 13911.2lb | 6310kg |
| Turning Radius | 15.4ft in | 4690mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 17.5-25-12PR (L2) |
03 Transmission Specification
| Transmission Type | Two-speed shifts ; high/low speed selection through hydraulic clutch | |
|---|---|---|
| Max Speed - Forward | 21.5mph | 34.5km/h |
| Max Speed - Reverse | 21.5mph | 34.5km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2132.1psi | 14700kPa |
|---|---|---|
| Pump Flow Capacity | 37.3gal/min | 141L/min |
| Raise Time | 5.6sec | |
| Dump Time | 1.2sec | |
| Lower Time | 3sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.99ft in | 2740mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.1yd3 | 1.6m3 |
| Bucket Capacity - Struck | 1.71yd3 | 1.3m3 |
| Bucket Width | 8.14ft in | 2480mm |
| Breakout Force | 17759.91lb | 79kN |
06 Dimensions Dimensions
| Ground Clearance | 1.2ft in | 365mm |
|---|---|---|
| Length With Bucket On Ground | 20.87ft in | 6360mm |
| Width Over Tires | 7.62ft in | 2320mm |
| Height To Top Of Cab | 10.31ft in | 3140mm |
| Wheelbase | 8.54ft in | 2600mm |
| Hinge Pin - Max Height | 11.83ft in | 3605mm |
| Reach At Max Lift And Dump | 3.38ft in | 1030mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.