Specification sheet Wheel Loader Ref hitachi-lx50-7-wheel-loader
Hitachi LX50-7
The Hitachi LX50-7 is a wheel loader with an operating weight of 10,350.71 lb (4,695 kg), a 59 hp engine, and a 1.18 yd³ (0.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
10,350.71lb
4,695kg
Engine power
59hp
44.1kW
Net Power Bucket capacity
1.18yd³
0.9m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Hitachi LX50-7 sits below the median for its class:
- Operating weight 10,350 lb lighter than 70% (n=374)
- Engine power 59 hp less powerful than 68% (n=367)
- Bucket capacity 1.2 yd³ smaller-bucket than 64% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2334 | |
| Engine Model | V3300-DI-KA | |
| Net Power | 59hp | 44.1kw |
| Power Measured @ | 2200rpm | |
| Displacement | 202.5cu in | 3.4L |
02 Operational Specification
| Operating Weight | 10350.8lb | 4695kg |
|---|---|---|
| Fuel Capacity | 19.9gal | 75L |
| Hydraulic System Fluid Capacity | 19.3gal | 73L |
| Engine Oil Fluid Capacity | 3.5gal | 13.2L |
| Cooling System Fluid Capacity | 3.2gal | 12L |
| Front Axle/Diff Fluid Capacity | 2.6gal | 9.5L |
| Rear Axle/Diff Fluid Capacity | 2.6gal | 9.5L |
| Static Tipping Weight | 7495.8lb | 3400kg |
| Turning Radius | 12.4ft in | 3770mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 60amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 17.5/65-20-10PR (L2) |
03 Transmission Specification
| Transmission Type | Hydrostatic transmission automatically controls power and speed with electrically controlled | |
|---|---|---|
| Max Speed - Forward | 21.2mph | 34km/h |
| Max Speed - Reverse | 21.2mph | 34km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2990psi | 20615.4kPa |
|---|---|---|
| Pump Flow Capacity | 20.8gal/min | 78.7L/min |
| Raise Time | 5sec | |
| Dump Time | 1sec | |
| Lower Time | 3.5sec | |
| Pump Type | gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.21ft in | 2500mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.18yd3 | 0.9m3 |
| Bucket Capacity - Struck | 0.92yd3 | 0.7m3 |
| Bucket Width | 6.53ft in | 1990mm |
| Breakout Force | 10566.02lb | 47kN |
06 Dimensions Dimensions
| Ground Clearance | 1.12ft in | 340mm |
|---|---|---|
| Length With Bucket On Ground | 16.46ft in | 5015mm |
| Width Over Tires | 6.3ft in | 1920mm |
| Height To Top Of Cab | 8.93ft in | 2720mm |
| Wheelbase | 7.22ft in | 2200mm |
| Hinge Pin - Max Height | 10.37ft in | 3160mm |
| Reach At Max Lift And Dump | 2.89ft in | 880mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.