Specification sheet Wheel Loader Ref hitachi-lx300-7a-wheel-loader
Hitachi LX300-7A
The Hitachi LX300-7A is a wheel loader with an operating weight of 65,477.3 lb (29,700 kg), a 326 hp engine, and a 6.54 yd³ (5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
65,477.3lb
29,700kg
Engine power
326hp
243kW
Net Power Bucket capacity
6.54yd³
5m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Hitachi LX300-7A sits above the median for its class:
- Operating weight 65,480 lb heavier than 81% (n=198)
- Engine power 326 hp more powerful than 83% (n=190)
- Bucket capacity 6.5 yd³ larger-bucket than 80% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2353 | |
| Engine Model | CC-6WG1X | |
| Net Power | 326hp | 243kw |
| Power Measured @ | 1800rpm | |
| Displacement | 957cu in | 15.7L |
| Aspiration | Turbocharger & intercooler |
02 Operational Specification
| Operating Weight | 65477.3lb | 29700kg |
|---|---|---|
| Fuel Capacity | 118.9gal | 450L |
| Hydraulic System Fluid Capacity | 68.7gal | 260L |
| Engine Oil Fluid Capacity | 9gal | 34L |
| Cooling System Fluid Capacity | 23.8gal | 90L |
| Transmission Fluid Capacity | 13.3gal | 50L |
| Front Axle/Diff Fluid Capacity | 22.5gal | 85L |
| Rear Axle/Diff Fluid Capacity | 23gal | 87L |
| Static Tipping Weight | 45503.5lb | 20640kg |
| Turning Radius | 22.3ft in | 6780mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Rear Axle Oscillation | 24degrees | |
| Tire Size | 26.5-25-24PR (L3) |
03 Transmission Specification
| Transmission Type | Torque converter, countershaft type powershift with computer controlled automatic shift and manual shift features included | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 20.9mph | 33.5km/h |
| Max Speed - Reverse | 21.5mph | 34.5km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2987.8psi | 20600kPa |
|---|---|---|
| Pump Flow Capacity | 40.7gal/min | 154L/min |
| Raise Time | 6.8sec | |
| Dump Time | 1.7sec | |
| Lower Time | 3.5sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.27ft in | 3130mm |
|---|---|---|
| Bucket Capacity - Heaped | 6.54yd3 | 5m3 |
| Bucket Capacity - Struck | 5.63yd3 | 4.3m3 |
| Bucket Width | 11.42ft in | 3480mm |
| Breakout Force | 53279.72lb | 237kN |
06 Dimensions Dimensions
| Ground Clearance | 1.4ft in | 425mm |
|---|---|---|
| Length With Bucket On Ground | 30.94ft in | 9430mm |
| Width Over Tires | 10.44ft in | 3180mm |
| Height To Top Of Cab | 12.31ft in | 3750mm |
| Wheelbase | 12.14ft in | 3700mm |
| Hinge Pin - Max Height | 14.54ft in | 4430mm |
| Reach At Max Lift And Dump | 4.86ft in | 1480mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.