Specification sheet Wheel Loader Ref hitachi-lx30-7-wheel-loader
Hitachi LX30-7
The Hitachi LX30-7 is a wheel loader with an operating weight of 7,198.1 lb (3,265 kg), a 36 hp engine, and a 0.66 yd³ (0.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
7,198.1lb
3,265kg
Engine power
36hp
27.2kW
Net Power Bucket capacity
0.66yd³
0.5m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Hitachi LX30-7 sits at the compact end of its class:
- Operating weight 7,200 lb lighter than 90% (n=374)
- Engine power 36 hp less powerful than 94% (n=367)
- Bucket capacity 0.7 yd³ smaller-bucket than 93% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2334 | |
| Engine Model | D1503-DI-T-K2A | |
| Net Power | 36hp | 27.2kw |
| Power Measured @ | 2500rpm | |
| Displacement | 91.5cu in | 1.5L |
| Aspiration | Turbocharger |
02 Operational Specification
| Operating Weight | 7198.1lb | 3265kg |
|---|---|---|
| Fuel Capacity | 13.2gal | 50L |
| Hydraulic System Fluid Capacity | 11.1gal | 42L |
| Engine Oil Fluid Capacity | 1.5gal | 5.6L |
| Cooling System Fluid Capacity | 1.6gal | 6.1L |
| Front Axle/Diff Fluid Capacity | 1.2gal | 4.5L |
| Rear Axle/Diff Fluid Capacity | 1.2gal | 4.5L |
| Static Tipping Weight | 4541.6lb | 2060kg |
| Turning Radius | 10.6ft in | 3220mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 40amps | |
| Rear Axle Oscillation | 16degrees | |
| Tire Size | 15.5/60-18-8PR (L2) Tubeless, nylon body |
03 Transmission Specification
| Transmission Type | Hydrostatic transmission automatically controls power and speed with electrically controlled | |
|---|---|---|
| Max Speed - Forward | 9.3mph | 15km/h |
| Max Speed - Reverse | 9.4mph | 15km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2990psi | 20615.4kPa |
|---|---|---|
| Pump Flow Capacity | 10.9gal/min | 41.2L/min |
| Raise Time | 5sec | |
| Dump Time | 1.2sec | |
| Lower Time | 3.2sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.03ft in | 2445mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.66yd3 | 0.5m3 |
| Bucket Capacity - Struck | 0.55yd3 | 0.42m3 |
| Bucket Width | 5.55ft in | 1690mm |
| Breakout Force | 8050lb | 36kN |
06 Dimensions Dimensions
| Ground Clearance | 0.97ft in | 295mm |
|---|---|---|
| Length With Bucket On Ground | 14.52ft in | 4425mm |
| Width Over Tires | 5.43ft in | 1655mm |
| Height To Top Of Cab | 8.34ft in | 2540mm |
| Wheelbase | 6.24ft in | 1900mm |
| Hinge Pin - Max Height | 9.95ft in | 3030mm |
| Reach At Max Lift And Dump | 2.78ft in | 845mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.