Specification sheet Wheel Loader Ref hitachi-lx230-7-wheel-loader
Hitachi LX230-7
The Hitachi LX230-7 is a wheel loader with an operating weight of 47,994.64 lb (21,770 kg), a 266 hp engine, and a 5.24 yd³ (4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
47,994.64lb
21,770kg
Engine power
266hp
198.4kW
Net Power Bucket capacity
5.24yd³
4m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Hitachi LX230-7 sits below the median for its class:
- Operating weight 47,990 lb lighter than 84% (n=198)
- Engine power 266 hp less powerful than 64% (n=190)
- Bucket capacity 5.2 yd³ smaller-bucket than 72% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2251 | |
|---|---|---|
| Engine Model | 6D24TL | |
| Net Power | 266hp | 198.4kw |
| Power Measured @ | 2100rpm | |
| Displacement | 729cu in | 12L |
02 Operational Specification
| Operating Weight | 47994.7lb | 21770kg |
|---|---|---|
| Fuel Capacity | 97.8gal | 370L |
| Turning Radius | 19.1ft in | 5820mm |
| Tire Size | 26.5-25-20 PR L3 |
03 Transmission Specification
| Transmission Type | 4-speed full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.5mph | 34.5km/h |
| Max Speed - Reverse | 22.7mph | 36.5km/h |
04 Hydraulic System Specification
| Raise Time | 6.4sec | |
|---|---|---|
| Dump Time | 1.5sec | |
| Lower Time | 3.6sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 10.29ft in | 3135mm |
|---|---|---|
| Bucket Capacity - Heaped | 5.24yd3 | 4m3 |
| Bucket Width | 10.34ft in | 3150mm |
| Breakout Force | 44512.17lb | 198kN |
06 Dimensions Dimensions
| Ground Clearance | 1.71ft in | 520mm |
|---|---|---|
| Length With Bucket On Ground | 28.38ft in | 8650mm |
| Width Over Tires | 9.78ft in | 2980mm |
| Height To Top Of Cab | 11.39ft in | 3470mm |
| Wheelbase | 11.16ft in | 3400mm |
| Hinge Pin - Max Height | 14.39ft in | 4385mm |
| Reach At Max Lift And Dump | 4.19ft in | 1275mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.