Specification sheet Wheel Loader Ref hitachi-lx200-wheel-loader
Hitachi LX200
The Hitachi LX200 is a wheel loader with an operating weight of 46,340 lb (21,019.48 kg), a 240 hp engine, and a 4.58 yd³ (3.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
46,340lb
21,019.48kg
Engine power
240hp
179kW
Net Power Bucket capacity
4.58yd³
3.5m³
◆Where it sits in its classpercentile · medium wheel loaders
Among 198 medium wheel loaders (45,000–90,000 lb), the Hitachi LX200 sits at the compact end of its class:
- Operating weight 46,340 lb lighter than 92% (n=198)
- Engine power 240 hp less powerful than 85% (n=190)
- Bucket capacity 4.6 yd³ smaller-bucket than 90% (n=174)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2311 | |
| Engine Model | PE6T34 | |
| Net Power | 240hp | 179kw |
| Power Measured @ | 2100rpm | |
| Max Torque | 708.1lb ft | 960Nm |
| Displacement | 712cu in | 11.7L |
| Torque Measured @ | 1400rpm | |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 46340lb | 21019.5kg |
|---|---|---|
| Fuel Capacity | 89.9gal | 340L |
| Hydraulic System Fluid Capacity | 52.9gal | 200L |
| Engine Oil Fluid Capacity | 8.8gal | 33L |
| Cooling System Fluid Capacity | 21.2gal | 80L |
| Transmission Fluid Capacity | 11.4gal | 43L |
| Front Axle/Diff Fluid Capacity | 8.5gal | 32L |
| Rear Axle/Diff Fluid Capacity | 8.5gal | 32L |
| Static Tipping Weight | 35960lb | 16311.2kg |
| Turning Radius | 22.4ft in | 6820mm |
| Operating Voltage | 24V | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 26.5-25-20PR |
03 Transmission Specification
| Transmission Type | Torque Converter | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 24.3mph | 39km/h |
| Max Speed - Reverse | 25.8mph | 41.5km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3130psi | 21580.6kPa |
|---|---|---|
| Pump Flow Capacity | 87.8gal/min | 332L/min |
| Raise Time | 6.6sec | |
| Dump Time | 1.5sec | |
| Lower Time | 3.5sec | |
| Pump Type | 2x Gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.67ft in | 2945mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.58yd3 | 3.5m3 |
| Bucket Capacity - Struck | 3.93yd3 | 3m3 |
| Breakout Force | 45411.41lb | 202kN |
06 Dimensions Dimensions
| Ground Clearance | 1.69ft in | 515mm |
|---|---|---|
| Length With Bucket On Ground | 27.58ft in | 8405mm |
| Width Over Tires | 9.54ft in | 2905mm |
| Height To Top Of Cab | 11.72ft in | 3570mm |
| Wheelbase | 11.16ft in | 3400mm |
| Hinge Pin - Max Height | 13.65ft in | 4160mm |
| Reach At Max Lift And Dump | 4.6ft in | 1400mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.