Specification sheet Wheel Loader Ref hitachi-lx20-7-wheel-loader
Hitachi LX20-7
The Hitachi LX20-7 is a wheel loader with an operating weight of 5,831.23 lb (2,645 kg), a 28 hp engine, and a 0.53 yd³ (0.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
5,831.23lb
2,645kg
Engine power
28hp
21.3kW
Net Power Bucket capacity
0.53yd³
0.4m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Hitachi LX20-7 sits at the compact end of its class:
- Operating weight 5,830 lb lighter than 94% (n=374)
- Engine power 28 hp less powerful than 97% (n=367)
- Bucket capacity 0.5 yd³ smaller-bucket than 96% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 3 | |
|---|---|---|
| Engine Make | 2334 | |
| Engine Model | D1503-DI-K2A | |
| Net Power | 28hp | 21.3kw |
| Power Measured @ | 2400rpm | |
| Displacement | 91.5cu in | 1.5L |
02 Operational Specification
| Operating Weight | 5831.3lb | 2645kg |
|---|---|---|
| Fuel Capacity | 13.2gal | 50L |
| Hydraulic System Fluid Capacity | 11.1gal | 42L |
| Engine Oil Fluid Capacity | 1.5gal | 5.6L |
| Cooling System Fluid Capacity | 1.6gal | 5.7L |
| Front Axle/Diff Fluid Capacity | 1.2gal | 4.5L |
| Rear Axle/Diff Fluid Capacity | 1.2gal | 4.5L |
| Static Tipping Weight | 3637.7lb | 1650kg |
| Turning Radius | 10ft in | 3040mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 40amps | |
| Rear Axle Oscillation | 16degrees | |
| Tire Size | 15.5/60-18-8PR (L2) tubeless, nylon body |
03 Transmission Specification
| Transmission Type | Hydrostatic transmission automatically controls power and speed with electrically controlled | |
|---|---|---|
| Max Speed - Forward | 9.3mph | 15km/h |
| Max Speed - Reverse | 9.4mph | 15km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2990psi | 20615.4kPa |
|---|---|---|
| Pump Flow Capacity | 8.9gal/min | 33.6L/min |
| Raise Time | 5sec | |
| Dump Time | 1sec | |
| Lower Time | 3.2sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 7.08ft in | 2155mm |
|---|---|---|
| Bucket Capacity - Heaped | 0.53yd3 | 0.4m3 |
| Bucket Capacity - Struck | 0.5yd3 | 0.38m3 |
| Bucket Width | 5.16ft in | 1570mm |
| Breakout Force | 6170lb | 27kN |
06 Dimensions Dimensions
| Ground Clearance | 0.84ft in | 255mm |
|---|---|---|
| Length With Bucket On Ground | 13.59ft in | 4140mm |
| Width Over Tires | 4.94ft in | 1505mm |
| Height To Top Of Cab | 8.08ft in | 2460mm |
| Wheelbase | 5.84ft in | 1780mm |
| Hinge Pin - Max Height | 8.81ft in | 2685mm |
| Reach At Max Lift And Dump | 2.68ft in | 815mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.