Specification sheet Wheel Loader Ref hitachi-lx190-7-wheel-loader
Hitachi LX190-7
The Hitachi LX190-7 is a wheel loader with an operating weight of 43,585.39 lb (19,770 kg), a 222 hp engine, and a 4.58 yd³ (3.5 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
43,585.39lb
19,770kg
Engine power
222hp
165.6kW
Net Power Bucket capacity
4.58yd³
3.5m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Hitachi LX190-7 sits at the heavy end of its class:
- Operating weight 43,590 lb heavier than 96% (n=439)
- Engine power 222 hp more powerful than 91% (n=408)
- Bucket capacity 4.6 yd³ larger-bucket than 92% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2251 | |
|---|---|---|
| Engine Model | 6D24TL | |
| Net Power | 222hp | 165.6kw |
| Power Measured @ | 2100rpm | |
| Displacement | 729cu in | 12L |
02 Operational Specification
| Operating Weight | 43585.4lb | 19770kg |
|---|---|---|
| Fuel Capacity | 97.8gal | 370L |
| Turning Radius | 19.1ft in | 5820mm |
| Tire Size | 23.5-25-16PR L3 |
03 Transmission Specification
| Transmission Type | 4-speed full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.5mph | 34.5km/h |
| Max Speed - Reverse | 23mph | 37km/h |
04 Hydraulic System Specification
| Raise Time | 6.2sec | |
|---|---|---|
| Dump Time | 1.4sec | |
| Lower Time | 3.3sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.8ft in | 2985mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.58yd3 | 3.5m3 |
| Bucket Width | 10.01ft in | 3050mm |
| Breakout Force | 37318.29lb | 166kN |
06 Dimensions Dimensions
| Ground Clearance | 1.51ft in | 460mm |
|---|---|---|
| Length With Bucket On Ground | 27.92ft in | 8510mm |
| Width Over Tires | 9.62ft in | 2930mm |
| Height To Top Of Cab | 11.19ft in | 3410mm |
| Wheelbase | 11.16ft in | 3400mm |
| Hinge Pin - Max Height | 13.72ft in | 4180mm |
| Reach At Max Lift And Dump | 3.73ft in | 1135mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.