Specification sheet Wheel Loader Ref hitachi-lx160-7-wheel-loader
Hitachi LX160-7
The Hitachi LX160-7 is a wheel loader with an operating weight of 37,632.91 lb (17,070 kg), a 192 hp engine, and a 4.19 yd³ (3.2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
37,632.91lb
17,070kg
Engine power
192hp
143.2kW
Net Power Bucket capacity
4.19yd³
3.2m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Hitachi LX160-7 sits above the median for its class:
- Operating weight 37,630 lb heavier than 75% (n=439)
- Engine power 192 hp more powerful than 72% (n=408)
- Bucket capacity 4.2 yd³ larger-bucket than 82% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2353 | |
|---|---|---|
| Engine Model | BB-6HK1T | |
| Net Power | 192hp | 143.2kw |
| Power Measured @ | 2200rpm | |
| Displacement | 475.4cu in | 7.8L |
02 Operational Specification
| Operating Weight | 37633lb | 17070kg |
|---|---|---|
| Fuel Capacity | 63.5gal | 240L |
| Turning Radius | 18.3ft in | 5560mm |
| Tire Size | 23.5-25-16PR L3 |
03 Transmission Specification
| Transmission Type | 4-speed full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.5mph | 34.5km/h |
| Max Speed - Reverse | 23mph | 37km/h |
04 Hydraulic System Specification
| Raise Time | 6sec | |
|---|---|---|
| Dump Time | 1.4sec | |
| Lower Time | 3.3sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.44ft in | 2875mm |
|---|---|---|
| Bucket Capacity - Heaped | 4.19yd3 | 3.2m3 |
| Bucket Width | 9.55ft in | 2910mm |
| Breakout Force | 34620.58lb | 154kN |
06 Dimensions Dimensions
| Ground Clearance | 1.55ft in | 470mm |
|---|---|---|
| Length With Bucket On Ground | 26.51ft in | 8080mm |
| Width Over Tires | 9.22ft in | 2810mm |
| Height To Top Of Cab | 10.85ft in | 3305mm |
| Wheelbase | 10.67ft in | 3250mm |
| Hinge Pin - Max Height | 13.26ft in | 4040mm |
| Reach At Max Lift And Dump | 3.88ft in | 1180mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.