Specification sheet Wheel Loader Ref hitachi-lx150-super-wheel-loader
Hitachi LX150 Super
The Hitachi LX150 Super is a wheel loader with an operating weight of 35,400 lb (16,057.18 kg), a 170 hp engine, and a 3.8 yd³ (2.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
35,400lb
16,057.18kg
Engine power
170hp
126.8kW
Net Power Bucket capacity
3.8yd³
2.9m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Hitachi LX150 Super sits above the median for its class:
- Operating weight 35,400 lb heavier than 68% (n=439)
- Engine power 170 hp more powerful than 55% (n=408)
- Bucket capacity 3.8 yd³ larger-bucket than 70% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 6076A | |
| Net Power | 170hp | 126.8kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 580.5lb ft | 787Nm |
| Displacement | 466cu in | 7.7L |
| Torque Measured @ | 1300rpm | |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 35400lb | 16057.2kg |
|---|---|---|
| Fuel Capacity | 75.1gal | 284L |
| Hydraulic System Fluid Capacity | 30.4gal | 115L |
| Engine Oil Fluid Capacity | 5.9gal | 22L |
| Cooling System Fluid Capacity | 7.6gal | 28.5L |
| Transmission Fluid Capacity | 3.7gal | 14L |
| Front Axle/Diff Fluid Capacity | 6.1gal | 23L |
| Rear Axle/Diff Fluid Capacity | 6.1gal | 23L |
| Static Tipping Weight | 27230lb | 12351.4kg |
| Turning Radius | 21.2ft in | 6440mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 95amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 23.5x25 |
03 Transmission Specification
| Transmission Type | Power Shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 21.5mph | 34.7km/h |
| Max Speed - Reverse | 13.7mph | 22.1km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 3000psi | 20684.3kPa |
|---|---|---|
| Pump Flow Capacity | 69.5gal/min | 263L/min |
| Raise Time | 6.2sec | |
| Dump Time | 1.8sec | |
| Lower Time | 3.5sec | |
| Pump Type | Gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.13ft in | 2780mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.8yd3 | 2.9m3 |
| Bucket Capacity - Struck | 3.21yd3 | 2.46m3 |
| Breakout Force | 37430.69lb | 166.5kN |
06 Dimensions Dimensions
| Ground Clearance | 1.6ft in | 485mm |
|---|---|---|
| Length With Bucket On Ground | 26.12ft in | 7960mm |
| Width Over Tires | 9.08ft in | 2765mm |
| Height To Top Of Cab | 11.23ft in | 3420mm |
| Wheelbase | 10.5ft in | 3200mm |
| Hinge Pin - Max Height | 13.13ft in | 4000mm |
| Reach At Max Lift And Dump | 3.94ft in | 1200mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.