Specification sheet Wheel Loader Ref hitachi-lx130-7-wheel-loader
Hitachi LX130-7
The Hitachi LX130-7 is a wheel loader with an operating weight of 30,357.66 lb (13,770 kg), a 173 hp engine, and a 3.54 yd³ (2.7 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
30,357.66lb
13,770kg
Engine power
173hp
129.1kW
Net Power Bucket capacity
3.54yd³
2.7m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Hitachi LX130-7 sits in the middle of its class:
- Operating weight 30,360 lb lighter than 53% (n=439)
- Engine power 173 hp more powerful than 60% (n=408)
- Bucket capacity 3.5 yd³ larger-bucket than 61% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2353 | |
|---|---|---|
| Engine Model | BB-6HK1T | |
| Net Power | 173hp | 129.1kw |
| Power Measured @ | 2300rpm | |
| Displacement | 475.4cu in | 7.8L |
02 Operational Specification
| Operating Weight | 30357.7lb | 13770kg |
|---|---|---|
| Fuel Capacity | 60.8gal | 230L |
| Turning Radius | 17.2ft in | 5230mm |
| Tire Size | 20.5-25-12PR L3 |
03 Transmission Specification
| Transmission Type | 4-speed full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.5mph | 34.5km/h |
| Max Speed - Reverse | 23mph | 37km/h |
04 Hydraulic System Specification
| Raise Time | 5.8sec | |
|---|---|---|
| Dump Time | 1.4sec | |
| Lower Time | 3.3sec |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.09ft in | 2770mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.54yd3 | 2.7m3 |
| Bucket Width | 8.83ft in | 2690mm |
| Breakout Force | 28101.12lb | 125kN |
06 Dimensions Dimensions
| Ground Clearance | 1.33ft in | 405mm |
|---|---|---|
| Length With Bucket On Ground | 24.68ft in | 7520mm |
| Width Over Tires | 8.57ft in | 2610mm |
| Height To Top Of Cab | 10.63ft in | 3240mm |
| Wheelbase | 10.01ft in | 3050mm |
| Hinge Pin - Max Height | 12.77ft in | 3890mm |
| Reach At Max Lift And Dump | 3.48ft in | 1060mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.