Specification sheet Wheel Loader Ref hitachi-lx120-super-wheel-loader
Hitachi LX120 Super
The Hitachi LX120 Super is a wheel loader with an operating weight of 28,025 lb (12,711.93 kg), a 145 hp engine, and a 3.01 yd³ (2.3 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
28,025lb
12,711.93kg
Engine power
145hp
108.2kW
Net Power Bucket capacity
3.01yd³
2.3m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Hitachi LX120 Super sits below the median for its class:
- Operating weight 28,030 lb lighter than 66% (n=439)
- Engine power 145 hp less powerful than 69% (n=408)
- Bucket capacity 3 yd³ smaller-bucket than 60% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2240 | |
| Engine Model | 6068T | |
| Net Power | 145hp | 108.2kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 420.5lb ft | 570Nm |
| Displacement | 414cu in | 6.8L |
| Torque Measured @ | 1300rpm | |
| Aspiration | Turbocharged |
02 Operational Specification
| Operating Weight | 28025lb | 12712kg |
|---|---|---|
| Fuel Capacity | 65.8gal | 249L |
| Hydraulic System Fluid Capacity | 27gal | 102L |
| Engine Oil Fluid Capacity | 4.5gal | 17L |
| Cooling System Fluid Capacity | 6.7gal | 25L |
| Transmission Fluid Capacity | 3gal | 11L |
| Front Axle/Diff Fluid Capacity | 6.1gal | 23L |
| Rear Axle/Diff Fluid Capacity | 4.3gal | 16L |
| Static Tipping Weight | 21155lb | 9595.8kg |
| Turning Radius | 19.9ft in | 6060mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 95amps | |
| Rear Axle Oscillation | 26degrees | |
| Tire Size | 20.5x25 |
03 Transmission Specification
| Transmission Type | Power Shift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 23mph | 37.1km/h |
| Max Speed - Reverse | 15.2mph | 24.5km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2800psi | 19305.4kPa |
|---|---|---|
| Pump Flow Capacity | 61.1gal/min | 231L/min |
| Raise Time | 5.8sec | |
| Dump Time | 1.7sec | |
| Lower Time | 3.5sec | |
| Pump Type | Gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.96ft in | 2730mm |
|---|---|---|
| Bucket Capacity - Heaped | 3.01yd3 | 2.3m3 |
| Bucket Capacity - Struck | 2.63yd3 | 2.01m3 |
| Breakout Force | 29405.01lb | 130.81kN |
06 Dimensions Dimensions
| Ground Clearance | 1.43ft in | 435mm |
|---|---|---|
| Length With Bucket On Ground | 24.97ft in | 7610mm |
| Width Over Tires | 8.27ft in | 2520mm |
| Height To Top Of Cab | 10.83ft in | 3300mm |
| Wheelbase | 9.95ft in | 3030mm |
| Hinge Pin - Max Height | 12.77ft in | 3890mm |
| Reach At Max Lift And Dump | 3.55ft in | 1080mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.