Specification sheet Wheel Loader Ref hitachi-lx110-7-wheel-loader
Hitachi LX110-7
The Hitachi LX110-7 is a wheel loader with an operating weight of 22,244.65 lb (10,090 kg), a 128 hp engine, and a 2.62 yd³ (2 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
22,244.65lb
10,090kg
Engine power
128hp
96kW
Net Power Bucket capacity
2.62yd³
2m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Hitachi LX110-7 sits at the compact end of its class:
- Operating weight 22,240 lb lighter than 99% (n=439)
- Engine power 128 hp less powerful than 86% (n=408)
- Bucket capacity 2.6 yd³ smaller-bucket than 76% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2353 | |
| Engine Model | BB-6BG1T | |
| Net Power | 128hp | 96kw |
| Power Measured @ | 2200rpm | |
| Displacement | 396.3cu in | 6.5L |
| Aspiration | Turbocharger |
02 Operational Specification
| Operating Weight | 22244.7lb | 10090kg |
|---|---|---|
| Fuel Capacity | 45gal | 170L |
| Hydraulic System Fluid Capacity | 21.2gal | 80L |
| Engine Oil Fluid Capacity | 3.5gal | 13L |
| Cooling System Fluid Capacity | 8.2gal | 31L |
| Transmission Fluid Capacity | 5.3gal | 20L |
| Front Axle/Diff Fluid Capacity | 5.6gal | 21L |
| Rear Axle/Diff Fluid Capacity | 5.6gal | 21L |
| Static Tipping Weight | 17416.6lb | 7900kg |
| Turning Radius | 16.4ft in | 4990mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 50amps | |
| Tire Size | 17.5-25-12PR (L3) |
03 Transmission Specification
| Transmission Type | Torque converter ; countershaft type powershift with electrically controlled | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 4 | |
| Max Speed - Forward | 21.5mph | 34.5km/h |
| Max Speed - Reverse | 21.8mph | 35km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2986.4psi | 20590kPa |
|---|---|---|
| Pump Flow Capacity | 13.8gal/min | 52L/min |
| Raise Time | 5.9sec | |
| Dump Time | 1.4sec | |
| Lower Time | 3sec | |
| Pump Type | gear type |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.06ft in | 2760mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.62yd3 | 2m3 |
| Bucket Capacity - Struck | 2.23yd3 | 1.7m3 |
| Bucket Width | 8.14ft in | 2480mm |
| Breakout Force | 22031.28lb | 98kN |
06 Dimensions Dimensions
| Ground Clearance | 1.32ft in | 400mm |
|---|---|---|
| Length With Bucket On Ground | 22.15ft in | 6750mm |
| Width Over Tires | 7.91ft in | 2410mm |
| Height To Top Of Cab | 10.31ft in | 3140mm |
| Wheelbase | 9.52ft in | 2900mm |
| Hinge Pin - Max Height | 12.19ft in | 3715mm |
| Reach At Max Lift And Dump | 3.52ft in | 1070mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.