Hitachi EX35-2
The Hitachi EX35-2 is a mini excavator with an operating weight of 7,121 lb, a 25.6 hp engine, and a dig depth of 10.31 ft.
✓ QA-verified — every figure checked for physical possibility and class plausibility; failures withheld →◆Where it sits in its classpercentile · mini excavators
Among 479 mini excavators , the Hitachi EX35-2 sits in the middle of its class:
- Operating weight 7,120 lb heavier than 57% (n=438)
- Engine power 26 hp more powerful than 56% (n=448)
- Dig depth 10.3 ft deeper-digging than 68% (n=426)
01 Boom/Stick Option (Hex) 1 Specification
| Shipping Length Of Unit | 16.36ft in | 4,987mm‖ — metric converted from the published imperial value |
|---|---|---|
| Max Cutting Height | 16.88ft in | 5,145mm‖ — metric converted from the published imperial value |
| Shipping Height Of Unit | 8.01ft in | 2,441mm‖ — metric converted from the published imperial value |
| Max Loading Height | 12.49ft in | 3,807mm‖ — metric converted from the published imperial value |
| Max Reach Along Ground | 16.88ft in | 5,145mm‖ — metric converted from the published imperial value |
| Max Vertical Wall Digging Depth | 8.19ft in | 2,496mm‖ — metric converted from the published imperial value |
| Max Digging Depth | 10.31ft in | 3,142mm‖ — metric converted from the published imperial value |
| Boom/Stick Option (Hex) 1 | Boom 2600mm / Stick 1350mm |
02 Dimensions Specification
| Width To Outside Of Tracks | 4.99ft in | 1,521mm‖ — metric converted from the published imperial value |
|---|---|---|
| Length Of Track On Ground | 5.24ft in | 1,597mm‖ — metric converted from the published imperial value |
| Ground Clearance | 1.09ft in | 332mm‖ — metric converted from the published imperial value |
| Height To Top Of Cab | 8.01ft in | 2,441mm‖ — metric converted from the published imperial value |
| Tail Swing Radius | 4.55ft in | 1,387mm‖ — metric converted from the published imperial value |
| Removal Counterweight Clearance | 1.86ft in | 567mm‖ — metric converted from the published imperial value |
03 Undercarriage Specification
| Shoe Size | 11.82in | 300.2mm‖ — metric converted from the published imperial value |
|---|---|---|
| Track Gauge | 4.01ft in | 1,222mm‖ — metric converted from the published imperial value |
| Max Travel Speed | 2.86mph | 4.6km/h‖ — metric converted from the published imperial value |
| Ground Pressure | 4.41psi | 30.4kpa‖ — metric converted from the published imperial value |
| Number Of Carrier Rollers Per Side | 1 | |
| Number Of Track Rollers Per Side | 4 |
04 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2334 | |
| Engine Model | V1505-KA | |
| Net Power | 25.6hp | 19.1kw‖ — metric converted from the published imperial value |
| Power Measured @ | 2100rpm | |
| Displacement | 91.5cu in | 1,499cm3‖ — metric converted from the published imperial value |
| Max Torque | 67.3lb ft | |
| Torque Measured @ | 1500rpm | |
| Aspiration | Natural |
05 Operational Specification
| Operating Weight | 7121lb | 3,230kg‖ — metric converted from the published imperial value |
|---|---|---|
| Fuel Capacity | 13.3gal | 50.3l‖ — metric converted from the published imperial value |
| Cooling System Fluid Capacity | 1.6gal | 6.1l‖ — metric converted from the published imperial value |
| Hydraulic System Fluid Capacity | 10.6gal | 40.1l‖ — metric converted from the published imperial value |
| Engine Oil Capacity | 1.7gal | 6.4l‖ — metric converted from the published imperial value |
| Operational Voltage | 12V | |
| Alternator Supplied Amperage | 52amps | |
| Hydraulic System Relief Valve Pressure | 3271.4psi | 22,556kpa‖ — metric converted from the published imperial value |
| Hydraulic Pump Flow Capacity | 20gal/min | 76l/min‖ — metric converted from the published imperial value |
06 Swing Mechanism Specification
| Swing Speed | 9rpm |
|---|
07 Buckets Specification
| Reference Bucket Capacity | 0.2yd3 | |
|---|---|---|
| Minimum Bucket Capacity | 0.1yd3 | |
| Maximum Bucket Capacity | 0.2yd3 |
Data notes
Converted metric figure. The source published imperial figures only for this machine. Metric figures marked ‖ are unit conversions of the published imperial value, rounded to the same precision — they are not separately published measurements. Because there is no independently published metric figure to compare against, no cross-unit consistency check applies to them; the imperial figures they derive from were checked for physically possible magnitude and for plausibility against this equipment class.
Method. Figures are manufacturer reference specifications, not measurements. The source published imperial figures for this machine in a single unit system, so no cross-unit consistency check applies; every value is checked for physically possible magnitude and for plausibility against its equipment class before publication. Figures that fail either check are withheld rather than shown, and figures reconstructed from related data are marked above. Metric figures marked ‖ are converted from the published imperial value rather than reproduced from the source.