Specification sheet Wheel Loader Ref halla-ha290-wheel-loader
Halla HA290
The Halla HA290 is a wheel loader with an operating weight of 34,259.84 lb (15,540 kg), a 189 hp engine, and a 3.8 yd³ (2.9 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
34,259.84lb
15,540kg
Engine power
189hp
141kW
Net Power Bucket capacity
3.8yd³
2.9m³
◆Where it sits in its classpercentile · small wheel loaders
Among 439 small wheel loaders (22,000–45,000 lb), the Halla HA290 sits above the median for its class:
- Operating weight 34,260 lb heavier than 64% (n=439)
- Engine power 189 hp more powerful than 71% (n=408)
- Bucket capacity 3.8 yd³ larger-bucket than 70% (n=387)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 6 | |
|---|---|---|
| Engine Make | 2347 | |
| Engine Model | 6CT8.3C | |
| Net Power | 189hp | 141kw |
| Gross Power | 192hp | 143.2kw |
| Power Measured @ | 2200rpm | |
| Max Torque | 608lb ft | 824.4Nm |
| Displacement | 504.7cu in | 8.3L |
| Torque Measured @ | 1500rpm | |
| Aspiration | turbocharged |
02 Operational Specification
| Operating Weight | 34259.9lb | 15540kg |
|---|---|---|
| Fuel Capacity | 75.6gal | 286L |
| Hydraulic System Fluid Capacity | 29.6gal | 112L |
| Engine Oil Fluid Capacity | 5gal | 18.9L |
| Cooling System Fluid Capacity | 11.9gal | 45L |
| Transmission Fluid Capacity | 4.8gal | 18L |
| Front Axle/Diff Fluid Capacity | 8.5gal | 32L |
| Rear Axle/Diff Fluid Capacity | 8.5gal | 32L |
| Static Tipping Weight | 28832.1lb | 13078kg |
| Turning Radius | 16.5ft in | 5010mm |
| Operating Voltage | 24V | |
| Alternator Supplied Amperage | 70amps | |
| Rear Axle Oscillation | 28degrees | |
| Tire Size | 23.5x25 16PR |
03 Transmission Specification
| Transmission Type | full powershift | |
|---|---|---|
| Number Of Forward Gears | 4 | |
| Number Of Reverse Gears | 3 | |
| Max Speed - Forward | 24.3mph | 39km/h |
| Max Speed - Reverse | 15.6mph | 25km/h |
04 Hydraulic System Specification
| Relief Valve Setting | 2957psi | 20387.8kPa |
|---|---|---|
| Pump Flow Capacity | 66.6gal/min | 252L/min |
| Raise Time | 6.6sec | |
| Dump Time | 1.5sec | |
| Lower Time | 2.5sec | |
| Pump Type | closed with pressure & vacuum relief |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 9.67ft in | 2945mm |
|---|---|---|
| Breakout Force | 35273lb | 156.91kN |
| Bucket Capacity - Heaped | 3.8yd3 | 2.9m3 |
| Bucket Width | 9.72ft in | 2960mm |
06 Dimensions Dimensions
| Ground Clearance | 1.53ft in | 465mm |
|---|---|---|
| Length With Bucket On Ground | 24.94ft in | 7600mm |
| Height To Top Of Cab | 10.86ft in | 3310mm |
| Wheelbase | 10.5ft in | 3200mm |
| Reach At Max Lift And Dump | 3.37ft in | 1025mm |
?Questions & answersfrom this machine's data
- How much does a Halla HA290 wheel loader weigh?
- A Halla HA290 wheel loader has an operating weight of 34,259.8 lb (15,540 kg).
- What engine does a Halla HA290 wheel loader have?
- A Halla HA290 wheel loader is powered by a 6CT8.3C engine producing 189 hp (141 kW).
- What size bucket does a Halla HA290 wheel loader have?
- A Halla HA290 wheel loader has a bucket capacity of 3.8 yd³ (2.9 m³).
- How much fuel does a Halla HA290 wheel loader hold?
- A Halla HA290 wheel loader has a fuel capacity of 75.6 gal (286 L).
- What is the ground clearance of a Halla HA290 wheel loader?
- A Halla HA290 wheel loader has a ground clearance of 1.5 ft (465 mm).
- How long is a Halla HA290 wheel loader?
- A Halla HA290 wheel loader has an overall length of 24.9 ft (7,600 mm) with the bucket on the ground.
- How fast does a Halla HA290 wheel loader travel?
- A Halla HA290 wheel loader has a maximum forward travel speed of 24.3 mph (39 km/h).
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.