Specification sheet Skid Steer Loader Ref gehl-v270-skid-steer-loader
Gehl V270
The Gehl V270 is a skid steer loader with an operating weight of 8,000 lb (3,628.74 kg), a 84 hp engine, and a rated operating capacity of 2,700 lb (1,224.7 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,000lb
3,628.74kg
Engine power
84hp
62.64kW
Net Power Rated operating capacity
2,700lb
1,224.7kg
◆Where it sits in its classpercentile · skid steer loaders
Among 360 skid steer loaders , the Gehl V270 sits above the median for its class:
- Operating weight 8,000 lb heavier than 79% (n=334)
- Engine power 84 hp more powerful than 87% (n=335)
- Rated operating capacity 2,700 lb higher-rated than 85% (n=288)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Engine Make | 2348 | |
|---|---|---|
| Engine Model | 4TNV98T-ZNMS | |
| Net Power | 84hp | 62.7kw |
| Power Measured @ | 2500rpm | |
| Max Torque | 215lb ft | 291.6Nm |
| Torque Measured @ | 1650rpm | |
| Displacement | 202cu in | 3.4L |
02 Operational Specification
| Operational Weight | 8000lb | 3628.8kg |
|---|---|---|
| Fuel Capacity | 22gal | 83.3L |
| Max Speed | 11.9mph | 19.2km/h |
| Hydraulic System Fluid Capacity | 11gal | 41.7L |
| Operating Speed | 8.1mph | 13.1km/h |
03 Loader Specification
| Operating Load Rating | 2700lb | 1224.7kg |
|---|
04 Hydraulic Specification
| Pump Flow Capacity | 21.8gal/min | 82.4L/min |
|---|---|---|
| Relief Valve Pressure | 3350psi | 23097.5kPa |
05 Dimensions Dimensions
| Length With Bucket | 12.44ft in | 3790mm |
|---|---|---|
| Width Over Tires | 5.8ft in | 1765mm |
| Ground Clearance | 8in | 203mm |
| Height To Top Of Cab | 6.71ft in | 2045mm |
| Wheelbase | 4.16ft in | 1265mm |
| Length W/O Bucket | 9.59ft in | 2921mm |
| Clearance At Max Lift And Dump | 8.26ft in | 2515mm |
| Reach At Max Lift And Dump | 34.02in | 864mm |
| Turning Radius From Center - Machine Rear | 65.52in | 1664mm |
| Turning Radius From Center - Inc Bucket | 93in | 2362mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.