Specification sheet Compact Track Loader Ref gehl-rt175-multi-terrain-loader
Gehl RT175
The Gehl RT175 is a compact track loader with an operating weight of 8,605 lb (3,903.17 kg), a 68.41 hp engine, and a rated operating capacity of 1,750 lb (793.79 kg).
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
8,605lb
3,903.17kg
Engine power
68.41hp
51.01kW
Net Power Rated operating capacity
1,750lb
793.79kg
◆Where it sits in its classpercentile · compact track loaders
Among 184 compact track loaders , the Gehl RT175 sits below the median for its class:
- Operating weight 8,610 lb lighter than 63% (n=182)
- Engine power 68 hp less powerful than 66% (n=167)
- Rated operating capacity 1,750 lb lower-rated than 87% (n=156)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2348 | |
| Engine Model | 4TNV98-ZNTBL | |
| Net Power | 68.4hp | 51.1kw |
| Power Measured @ | 2500rpm | |
| Peak Torque | 179lb ft | 242.7Nm |
| Torque Measured @ | 1600rpm | |
| Displacement | 203cu in | 3.4L |
| Aspiration | Natural |
02 Operational Specification
| Operating Weight | 8605lb | 3903.2kg |
|---|---|---|
| Cooling System Fluid Capacity | 3.6gal | 13.3L |
| Fuel Capacity | 24.4gal | 92L |
| Hydraulic System Fluid Capacity | 11gal | 41.6L |
| Operating Voltage | 12V | |
| Max Speed - Low Range | 5.1mph | 8.2km/h |
| Max Speed - High Range | 7.6mph | 12.1km/h |
03 Loader Specification
| Operating Load | 1750lb | 793.8kg |
|---|---|---|
| Bucket Width | 66in | 1674mm |
04 Hydraulic Specification
| Pump Flow | 18.5gal/min | 70L/min |
|---|
05 Dimensions Dimensions
| Width Over Tracks | 5.37ft in | 1636mm |
|---|---|---|
| Height To Top Of Cab | 6.9ft in | 2103mm |
| Ground Clearance | 13.51in | 343mm |
| Clearance At Max Lift And Dump | 8.17ft in | 2489mm |
| Reach At Max Lift And Dump | 2.88ft in | 876mm |
| Turning Radius From Center - Inc Bucket | 91.42in | 2322mm |
| Length With Bucket | 12.01ft in | 3658mm |
| Length With Out Bucket | 9.24ft in | 2814mm |
| Turning Radius From Center - Machine Rear | 62.09in | 1577mm |
06 Undercarriage Dimensions
| Length Of Track On Ground | 4.57ft in | 1392mm |
|---|---|---|
| Track Gauge | 4.31ft in | 1313mm |
| Number Of Track Rollers Per Side | 4 | |
| Width Of Track | 12.6in | 320mm |
| Ground Pressure | 6.2psi | 42.75kPa |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.