Specification sheet Wheel Loader Ref gehl-aws680-wheel-loader
Gehl AWS680
The Gehl AWS680 is a wheel loader with an operating weight of 12,015 lb (5,449.92 kg), a 75 hp engine, and a 2.36 yd³ (1.8 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
12,015lb
5,449.92kg
Engine power
75hp
55.93kW
Gross Power Bucket capacity
2.36yd³
1.8m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Gehl AWS680 sits in the middle of its class:
- Operating weight 12,020 lb lighter than 55% (n=374)
- Engine power 75 hp more powerful than 56% (n=367)
- Bucket capacity 2.4 yd³ larger-bucket than 93% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2349 | |
| Engine Model | BF4M 2011 | |
| Gross Power | 75hp | 56kw |
| Power Measured @ | 2300rpm | |
| Max Torque | 199lb ft | 269.9Nm |
| Displacement | 190cu in | 3.2L |
| Torque Measured @ | 1600rpm |
02 Operational Specification
| Operating Weight | 12015lb | 5450kg |
|---|---|---|
| Fuel Capacity | 21.2gal | 80L |
| Hydraulic System Fluid Capacity | 22.5gal | 85L |
| Static Tipping Weight | 8730lb | 3959.9kg |
| Turning Radius | 13.1ft in | 3980mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 95amps | |
| Rear Axle Oscillation | 18degrees |
03 Transmission Specification
| Max Speed - Forward | 12.4mph | 20km/h |
|---|
04 Hydraulic System Specification
| Relief Valve Setting | 3400psi | 23442.2kPa |
|---|---|---|
| Pump Flow Capacity | 18.5gal/min | 70.1L/min |
| Pump Type | gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.73ft in | 2660mm |
|---|---|---|
| Bucket Capacity - Heaped | 2.36yd3 | 1.8m3 |
| Breakout Force | 9217lb | 41kN |
06 Dimensions Dimensions
| Ground Clearance | 1.05ft in | 320mm |
|---|---|---|
| Length With Bucket On Ground | 18.38ft in | 5600mm |
| Width Over Tires | 6.01ft in | 1830mm |
| Height To Top Of Cab | 8.9ft in | 2710mm |
| Wheelbase | 6.73ft in | 2050mm |
| Hinge Pin - Max Height | 11.16ft in | 3400mm |
| Reach At Max Lift And Dump | 1.97ft in | 600mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.