Specification sheet Wheel Loader Ref gehl-aws480t-wheel-loader
Gehl AWS480T
The Gehl AWS480T is a wheel loader with an operating weight of 9,921 lb (4,500.09 kg), a 59 hp engine, and a 1.84 yd³ (1.4 m³) bucket.
✓ QA-verified — every figure checked for unit consistency, physical possibility, and class plausibility; failures withheld → Operating weight
9,921lb
4,500.09kg
Engine power
59hp
44kW
Gross Power Bucket capacity
1.84yd³
1.4m³
◆Where it sits in its classpercentile · compact wheel loaders
Among 374 compact wheel loaders (≤22,000 lb), the Gehl AWS480T sits below the median for its class:
- Operating weight 9,920 lb lighter than 76% (n=374)
- Engine power 59 hp less powerful than 68% (n=367)
- Bucket capacity 1.8 yd³ larger-bucket than 74% (n=309)
◇Scale drawingdrawn to scale · mm
01 Engine Specification
| Number Of Cylinders | 4 | |
|---|---|---|
| Engine Make | 2349 | |
| Engine Model | F4M 2011 | |
| Gross Power | 59hp | 44kw |
| Power Measured @ | 2400rpm | |
| Max Torque | 144lb ft | 195.3Nm |
| Displacement | 190cu in | 3.2L |
| Torque Measured @ | 1700rpm |
02 Operational Specification
| Operating Weight | 9921lb | 4500.1kg |
|---|---|---|
| Fuel Capacity | 21.2gal | 80L |
| Hydraulic System Fluid Capacity | 18.5gal | 70L |
| Static Tipping Weight | 7496lb | 3400.2kg |
| Turning Radius | 11.4ft in | 3450mm |
| Operating Voltage | 12V | |
| Alternator Supplied Amperage | 95amps | |
| Rear Axle Oscillation | 18degrees |
03 Transmission Specification
| Max Speed - Forward | 12.4mph | 20km/h |
|---|
04 Hydraulic System Specification
| Relief Valve Setting | 3046psi | 21001.5kPa |
|---|---|---|
| Pump Flow Capacity | 17.5gal/min | 66.3L/min |
| Pump Type | gear |
05 Bucket Dimensions
| Dump Clearance At Max Raise | 8.21ft in | 2500mm |
|---|---|---|
| Bucket Capacity - Heaped | 1.84yd3 | 1.4m3 |
| Breakout Force | 11016lb | 49.01kN |
06 Dimensions Dimensions
| Ground Clearance | 1.05ft in | 320mm |
|---|---|---|
| Length With Bucket On Ground | 16.67ft in | 5080mm |
| Width Over Tires | 5.58ft in | 1700mm |
| Height To Top Of Cab | 8.57ft in | 2610mm |
| Wheelbase | 6.3ft in | 1920mm |
| Hinge Pin - Max Height | 11.96ft in | 3645mm |
| Reach At Max Lift And Dump | 2.5ft in | 760mm |
Method. Figures are manufacturer reference specifications, not measurements. Every value is checked for unit consistency, physically possible magnitude, and plausibility for its equipment class before publication; figures that fail any check are withheld rather than shown, and figures reconstructed from related data are marked above. Imperial and metric figures are reproduced as published, except where a note states otherwise.